The study on the discharge performance of Li/FeS2 battery

The Li/FeS2 battery was developed, the production process and technical parameters are obtained. Two methods of improving the Li/FeS2 battery discharge performance: one is to add additives in cathode; two is to increase the composition of inorganic salt in the electrolyte. The results showed that: adding metal element and oxide in the cathode and the increase of the content of inorganic salts electrolyte, discharge capacity and discharge platform Li/FeS2 batteries have improved significantly. The test results of different discharge system, the best dosage of additives for metal oxide 0.5%, 3%, inorganic salt 0.4%.

FEATURES:No voltage delay and with steady operation voltage.
OCV is between 1.5~1.8V, operation voltage would be changed with different loads (1.3~1.5V), cut off voltage is 0.9V.
Wide operation temperature range from -30℃ to 75℃.
Suited for large current continuous discharge and pulse discharge.
Excellent shelf life (10 years), low self-discharge (1% or less per year).
Buy Li/FeS2 battery 

Li/MnO2 Battery

Application: Laptop computer, PDA, IC card, electric clock, watch, remote controlling key, camera, toys, etc. Feature: (1) high energy density up to 270WH/Kg(510WH/dm3). (2) High operation voltage, 2.7V~3.0V upon loading resistance. (3) Long storage life, less than 2% of self-discharging rate per year, could be stored for 10 year at room temperature. (4) Wide operation temperature range, -40℃~+70℃ (5) Non-magnetic stainless steel case, hermetically sealed. Be safe for transportation and general shock. No leakage problem. Caution: (1) Do not make the battery short-circuit and do not try to charge it. (2) Do not over-discharge , press or burn the battery. (3) The battery should be removed from the instrument on time when finishing discharging. (4) Do not try to solder directly on battery. (5) Do not disassemble the batteries.. (6) Do not use under temperature beyond specified range

About Li/SO2

FEATURES:Great output, steady operation voltage and safety.
OCV is between 2.9~3.0V, operation voltage would be changed with different loads 2.6~2.8V), cut off voltage is 2.0V
Wide temperature range of operation from -40℃ to 75℃.
Suited for large current continuous discharge and pulse discharge.
Excellent shelf life (10 years), low self-discharge (1% or less per year).

Applications:
Military Electronics, Night vision equipment, cryptographs, radio frequency channel selectors, target acquisition equipment etc.

Feature:
(1) high energy density up to 280WH/Kg(365WH/dm3).
(2) Open circuit voltage 2.95V, operation voltage is between 2.7V~2.9V upon loading resistance.
(3) Long storage life, less than 2% of self-discharging rate per year, could be stored for 10 year at room temperature.
(4) Spiral electrodes construction, could be discharged at large rate.
(5) Wide operation temperature range, -55~+70
(6) Non-magnetic stainless steel case, hermetically sealed. Be safe for transportation and general shock. No leakage problem.                  

Caution:
(1) Do not make the battery short-circuit and do not try to charge it.
(2) Do not over-discharge , press or burn the battery.
(3) The battery should be removed from the instrument on time when finishing discharging.
(4) Do not try to solder directly on battery .
(5) Do not disassemble the batteries..
(6) Do not use under temperature beyond specified range

About Li-SOCL2 Battery

Features of Li-SOCL2 Battery

1. Extensive Shelf Life
FORTE lithium batteries offer prolonged storage with a proven shelf life of 10 years when storage a room temperature.

2. Infinitely Reliable
FORTE l lithium batteries provide stable output voltage as well as steady discharge performance and high reliability and safety throughout the operating life of the cell.

3. Environmentally Safe
With a hermetically sealed structure, FORTE lithium batteries are environmentally friendly and pollutant free.

4. Increased Voltage
FORTE lithium batteries are a significant power source offering 3.6 volts.

5. Quick Pulse-Discharge
FORTE lithium batteries provide instantaneous power and are suitable for multiplied or heavy current pulse applications.

6. Wide Temperature Range 
FORTE lithium batteries operate within a temperature range of -55℃ to + 85℃.

7. Stainless Steel Container
FORTE lithium batteries are made with 100% stainless steel components to eliminate rust, corrosion, and magnetic compatibility issues with equipment performance.

8. Elevated Energy Density
FORTE lithium batteries provide high energy density relative to other primary cells.

Application fields：　

Utility meter (water, electricity, gas meter and AMR)

Alarm or security equipment (smoke alarm system, detector)

GPS tracking

Real-time clock

Digital control machine

Wireless sensors

Buy Li-SOCL2 Battery

About anhydrous

As a general term, a substance is said to be anhydrous if it contains no water. The way of achieving the anhydrous form differs from one substance to another. That is to say, anhydrous  atter is prepared or used as a form with no water, and specifically the form of a chemical without water of crystallization.

In many cases, the presence of water can prevent a reaction from happening, or form undesirable products. To prevent this, anhydrous  olvents must be used when performing certain reactions. Examples of reactions requiring the use of anhydrous  olvents are the Grignard reaction and the Wurtz reaction.
Solvents are commonly rendered anhydrous by boiling them in the presence of a hygroscopic substance; metallic sodium is one of the most common metals used. Other methods include the addition of molecular sieves or alkali bases such as potassium hydroxide or barium oxide. Column solvent purification devices (generally referred to as Grubb's columns) recently became available, reducing the hazards (water reactive substances, heat) from the classical dehydrating methods

About Lithium sulfate monohydrate

Lithium sulfate is soluble in water, though it does not follow the usual trend of solubility versus temperature — its solubility in water decreases with increasing temperature, as its dissolution is an exothermic process. This property is shared with few inorganic compounds, such as the lanthanoid sulfates.
Lithium sulfate  crystals, being piezoelectric, are also used in ultrasound-type non-destructive testing because they are very efficient sound generators. However, they do suffer in this application because of their water solubility.
Lithium sulfate is used to treat bipolar disorder (see lithium pharmacology).

About cesium carbonate

cesium carbonate is a white crystalline solid compound. Caesium carbonate has a high solubility in polar solvents such as water, alcohol and DMF. Its solubility is higher in organic solvents compared to other carbonates like potassium and sodium carbonates, although it remains quite insoluble in other organic solvents such as toluene, p-xylene, and chlorobenzene. This compound is used in organic synthesis as a base. It also appears to have applications in energy conversion.
Caesium carbonate is very important for the N-alkylation compounds such as sulfonamides, amines, β-lactams, indoles, heterocyclic compounds, N-substituted aromatic imides, phthalimides, and several similar other compounds. Research on these compounds has focused on their synthesis and biological activity. In the presence of gold sodium chloride (NaAuCl4), caesium carbonate is very efficient mechanism for aerobic oxidation of different kinds of alcohols into ketones and aldehydes at room temperature without additional polymeric compounds. There is no acid formation produced when primary alcohols are used. The process of selective oxidation of alcohols to carbonyls had been quite difficult due to the nucleophilic character of the carbonyl intermediate. In the past Cr(VI) and Mn(VII) reagents have been used to oxidize alcohols, however, these reagents are thought to be toxic to the environment, and are pricy. Caesium carbonate can also be used in Suzuki, Heck, and Sonogashira synthesis reactions. Caesium carbonate produces carbonylation of alcohols and carbamination of amines more efficiently than some of the mechanisms that have been introduced in the past. Caesium carbonate can be used for sensitive synthesis when a balanced strong base is needed.

20% n-Butyllithium cyclohexane

Molecular formula : n-C4H9Li
Property : Transparent colorless to yellow liquid
Molecular weight : 64.06
Density : 0.75 g/ml@20°C
Spontaneous combustion nature : Spontaneous combustion

Use : Organic catalyst

Packing : 5-10000 L/tank, or according to the user.

Transportation : mail, air transport 　　　Prohibition
shipping 　　　　　　4.2, UN #. 2445
land carriage 　　　　　4.2, UN #. 2445

Note:Easily to catch fire when exposing, produces flammable gas and corrosive dust. Far away from water, air, oxidized material, heat and spark, prevents reservoirdamage or divulging. 

About Rubidium carbonate

Rubidium carbonate can easily be converted into other Rubidium compounds , such as oxidation heating ( burning ) . Carbonate compounds also emit carbon dioxide, acid treatment. Usually lined with plastic bag plastic bottle packaging immediately in most volumes . High purity , submicron and summary form may be considered .It  is not particularly reactive , and easily soluble in water , is Rubidium form , usually for sale.The number of electrons in each shell is 2,8,18,8,1 Rubidium and its electronic configuration 5 s1. In its basic form, the CAS number is 7440-17-7 rubidium . In the center of a rubidium atomic radius of 247.5 . Point , this is the van der Waals radius of 200 .

What is Anhydrous calcium chloride ?

Anhydrous calcium chloride is white cubic crystal or powder, strong moisture absorption, relative density 2.15, melting point 775 ℃, the boiling point of 1935.5 ℃. Soluble in water and ethanol. Desiccant for a variety of substances, in addition to road dust, soil conditioner, a refrigerant. For chemical reagents, pharmaceutical raw materials, food additives, feed additives, raw materials and manufacturing metal calcium. Also used for dehydrating agent, the paddle agent, purifying agent.Calcium chloride is mainly used for the exploration and production, artificial rain, airports, highways of snow, coal dust, concrete, antifreeze and electronics industries. General merchandise is white porous block or granular, honeycomb. Odorless, slightly bitter taste. Density 2.15g/cm3. Melting point of 782 ℃. Boiling point> 1600 ℃. Soluble in water, soluble in alcohol, acetone, acetic acid.It can be used to remove arsenic and heavy metals have been refined neutral calcium chloride solution into a mist sprayed through a nozzle, and 300 ℃ for countercurrent contact with hot air to dry and dehydrated in the system. Desiccant for gas, production of alcohols, esters, ethers and acrylic resin of the dehydrating agent. Buy Anhydrous calcium chloride

Cesium sulfate

Caesium sulfate is the caesium salt of sulfuric acid. It is used to prepare dense aqueous solutions for use in isopycnic (or "density-gradient") centrifugation.

Molecular Formula : Cs2SO4
Appearance : Whiter crystal
Molecular weight : 361.87
Density : 4.24 G/cm3
Melting points : 1010°C

Application :A raw material for producing of various cesium compounds, widely used in the catalyst, special glass and ceramics etc.

Packing : 1000g/ plastic bottle, 20 bottle / carton 

Buy Caesium sulfate 

Information about Lithium metal,battery grade

Appearance : Metallic silver substance
Atomic weight : 6.94
Density : 0.539g/cm3
Melting points : 180.5°C
Boiling Point : 1317°C
Hardness(Mohs) : 0.6
Volume increase on melting : 1.51%

Application : Mainly used to make lithium battery, light alloy of lithium and aluminum, synthetic rubber and pharmaceutical industries etc.

Packing : Vacuum wrapped with aluminum foil plastic bag and put in dry steel drums. The ingots, foils, rods, upon customer request.

Caution : Lithium metal easy reaction with oxygen and nitrogen in wet air, easy burns or explodes when contact with water.

Caesium nitrate

Caesium nitrate is a chemical compound with the chemical formula CsNO3. It is used in pyrotechnic compositions, as a colorant and an oxidizer, e.g. in decoys and illumination flares. The caesium emissions are chiefly due to two powerful spectral lines at 852.113 nm and 894.347 nm.
Caesium nitrate prisms are used in infrared spectroscopy, in x-ray phosphors, and in scintillation counters.It is also used in making optical glasses and lenses.

Molecular Formula : CsNO3
Appearance : Whiter crystal
Molecular weight : 194.91
Melting points : 414°C

Application : A raw material for producing of various cesium compounds, widely used in the catalyst, special glass and ceramics etc.

Packing : 1000g/ plastic bottle, 20 bottle / carton

About cyclohexane

Cyclohexane is a cycloalkane with the molecular formula C6H12. Cyclohexane is used as a nonpolar solvent for the chemical industry, and also as a raw material for the industrial production of adipic acid and caprolactam, both of which being intermediates used in the production of nylon. On an industrial scale, cyclohexane is produced by reacting benzene with hydrogen. Producers of cyclohexane account for approximately 11.4% of global demand for benzene.Because of its unique chemical and conformational properties, cyclohexane is also used in labs in analysis and as a standard. Cyclohexane has a distinctive detergent-like odor, reminiscent of cleaning products.
Pure cyclohexane in itself is rather unreactive, being a non-polar, hydrophobic hydrocarbon. It can react with very strong acids such as the superacid system HF + SbF5, which will cause forced protonation and "hydrocarbon cracking". Substituted cyclohexanes, however, may be reactive under a variety of conditions, many of which being important to organic chemistry. Cyclohexane is highly flammable.

N-butyl lithium in hexane

Pyrophoric liquid, can catch fire if exposed to air. Reacts violently with water to give off flammable gases and corrosive dusts. Keep away from water, air, and oxidizing materials. Keep away from heat, sparks and flame. Protect storage container from leaks and physical damage.

Molecular Formula : n-C4H9Li
Appearance : Clear, colorless to yellow solution
Molecular weight : 64.06
Density : 0.68g/ml@20°C
Contained BuLi : 102g/l
Pyrophoricity : Pyrophoric

Application : Mainly used as catalyst of organic reaction

Packing : According to customer's request

Transportation : 
 Post, parcel, Air Not acceptable
 Sea   Class 4.2, UN No. 2445
 Road,Rail   Class 4.2, UN No. 2445

Caesium nitrate

Caesium nitrate is a chemical compound with the chemical formula CsNO3. It is used in pyrotechnic compositions, as a colorant and an oxidizer, e.g. in decoys and illumination flares. The caesium emissions are chiefly due to two powerful spectral lines at 852.113 nm and 894.347 nm.
Caesium nitrate prisms are used in infrared spectroscopy, in x-ray phosphors, and in scintillation counters. It is also used in making optical glasses and lenses.
As with other alkali metal nitrates, caesium nitrate decomposes on gentle heating to give caesium nitrite:
2CsNO3 → 2CsNO2 + O2
Caesium also forms two unusual acid nitrates, which can be described as CsNO3·HNO3 and CsNO3·2HNO3 (melting points 100 °C and 36–38 °C respectively).

Anhydrous sodium sulfate

Anhydrous sodium sulfate , also known as Glauber's salt , sodium sulfate ; Chemical Formula : Na2SO4 Molecular Weight : 142.04 Appearance: white uniform fine particles or powder . Odorless , salty and with a bitter taste . Density : 2.68g/cm. Melting point of 884 ℃. Soluble in water , solubility within the 0-30.4 ℃ rapidly with increasing temperature . Soluble in glycerin , insoluble in ethanol. Solution was neutral . When the solution is lower than 32.38 ℃ , places ten monohydrate crystallization . Higher than 32.38 ℃ begins with anhydrous sodium sulfate crystallization . Applications Mainly used for drying organic solvents except water, in addition to the effect of water fast , remaining less so . Dyes and additives can also be used as a filler to adjust the concentration of dyes and additives , so that up to standard levels . Also be used as direct dyes , sulfur dyes , vat dyes in the dye -promoting agent when cotton , silk dyeing direct and acid dyes in wool and animal fibers of slow dye , printed silk fabrics are also used when refining the background protective agent . Manufacture of kraft pulp and paper industry as a cooking agent when . Pharmaceutical industry as a barium salt poisoning antidote. In addition, for the glass , the construction industry and so on.

Sodium bromide

Sodium bromide is an inorganic compound with the formula NaBr. It is a high-melting white, crystalline solid that resembles sodium chloride. It is a widely used source of the bromide ion and has many applications.
Also known as Sedoneural, sodium bromide has been used as a hypnotic, anticonvulsant, and sedative in medicine, widely used as an anticonvulsant and a sedative in the late 19th and early 20th centuries. Its action is due to the bromide ion, and for this reason potassium bromide is equally effective.

Rubidium nitrate

 Rubidium nitrate is a white crystalline powder that is highly soluble in water and very slightly soluble in acetone. In a flame test, RbNO3 gives a mauveght purple colour. 

Rubidium compounds have very few applications.[1] Like caesium nitrate, it is used in infrared radiation producing pyrotechnic compositions as a colorant and an oxidizer, e.g. in decoys and illumination flares. It is also used as a raw material for preparation of other rubidium compounds and rubidium metal, for manufacture of catalysts and in scintillation counters. It is rarely used in fireworks to produce a red-violet color.

What is Gypsum ?

Gypsum is a very soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO4·2H2O. It can be used as a fertilizer, is the main constituent in many forms of plaster and is widely mined. A very fine-grained white or lightly tinted variety of gypsum, called alabaster, has been used for sculpture by many cultures including Ancient Egypt, Mesopotamia and the Nottingham alabasters of medieval England. It is the definition of a hardness of 2 on the Mohs scale of mineral hardness. It forms as an evaporite mineral and as a hydration product of anhydrite.
Gypsum is moderately water-soluble (~2.0–2.5 g/l at 25°C) and, in contrast to most other salts, it exhibits a retrograde solubility, becoming less soluble at higher temperatures. When gypsum is heated in air it loses water and converts first to calcium sulfate hemihydrate, (bassanite, often simply called "plaster") and, if heated further, to anhydrous calcium sulfate (anhydrite). As for anhydrite, its solubility in saline solutions and in brines is also strongly dependent on NaCl concentration.

Sodium hypochlorite

Sodium hypochlorite is a chemical compound with the formula NaClO. It is composed of a sodium cation (Na+) and a hypochlorite anion (ClO−); it may also be viewed as the sodium salt of hypochlorous acid. It is commonly known as bleach or liquid bleach, is frequently used as a disinfectant or a bleaching agent.

Sodium hypochlorite  was first produced in 1789 by Claude Louis Berthollet in his laboratory on the quay Javel in Paris, France, by passing chlorine gas through a solution of sodium carbonate. The resulting liquid, known as "Eau de Javel" ("Javel water"), was a weak solution of sodium hypochlorite. However, this process was not very efficient, and alternative production methods were sought. One such method involved the extraction of chlorinated lime (known as bleaching powder) with sodium carbonate to yield low levels of available chlorine. This method was commonly used to produce hypochlorite solutions for use as a hospital antiseptic that was sold after World War I under the trade names "Eusol" and "Dakin's Solution".
Near the end of the nineteenth century, E. S. Smith patented the chloralkali process: a method of producing sodium hypochlorite involving the electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite.[1][unreliable source?] Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

About Silica hydrated white carbon black, crude

Silica hydrated white carbon black, crude, also known as hydrated silica, precipitated silica and silica fine. Very high activity of silica dispersion, extinction, acid, high temperature of the rubber (natural synthetic rubber) have a good performance reinforcement of good electrical insulation is widely used in rubber, silicone rubber, plastics, polyester, paper, coatings, adhesives, pharmaceutical and daily chemical industry and is increasingly expanding its scope of application,
Feature
Fumed silica (white carbon black gas) is an extremely important new high-tech ultra-fine inorganic materials, because of its small size, so a large surface area, strong adsorption, the surface can be large, high chemical purity, dispersion performance, thermal resistance, resistance, etc. with specific performance, with its superior stability, reinforcement, thickening and thixotropy, in many disciplines and areas of unique features of the irreplaceable role. nanometer silicon oxide commonly known as “ultra-fine silica”, widely used in various industries as an additive, catalyst, petrochemical, bleaching agents, matting agents, rubber reinforcing agent, plastic filling agent, ink thickener, soft metal polishing agent insulation insulation filler, filler and coating high-level cosmetics materials, pharmaceuticals, environmental protection and other areas. and for the development of related industries provide a basis for new materials and technical assurance.
Application
1) paints and coatings (ep, up, pu, acrylic resin, pmma / mma, pvc plastisol)
2) unsaturated polyester resins, casting resins, laminating resins, up, mf, pf, ve gel coat;
3) htv temperature vulcanized silicone rubber and rtv2k two-component RTV silicone rubber, fluorine rubber, natural rubber;

About Gypsum

Gypsum is a very soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO4·2H2O. It can be used as a fertilizer, is the main constituent in many forms of plaster and is widely mined. A very fine-grained white or lightly tinted variety of gypsum, called alabaster, has been used for sculpture by many cultures including Ancient Egypt, Mesopotamia and the Nottingham alabasters of medieval England. It is the definition of a hardness of 2 on the Mohs scale of mineral hardness. It forms as an evaporite mineral and as a hydration product of anhydrite.
Gypsum is moderately water-soluble (~2.0–2.5 g/l at 25°C)[6] and, in contrast to most other salts, it exhibits a retrograde solubility, becoming less soluble at higher temperatures. When gypsum is heated in air it loses water and converts first to calcium sulfate hemihydrate, (bassanite, often simply called "plaster") and, if heated further, to anhydrous calcium sulfate (anhydrite). As for anhydrite, its solubility in saline solutions and in brines is also strongly dependent on NaCl concentration

Anhydrous sodium sulfate

Sodium sulfate is the sodium salt of sulfuric acid. When anhydrous, it is a white crystalline solid of formula Na2SO4 known as the mineral thenardite; the decahydrate Na2SO4·10H2O is found naturally as the mineral mirabilite, and in processed form has been known as Glauber's salt or, historically, sal mirabilis since the 17th century. Another solid is the heptahydrate, which transforms to mirabilite when cooled. With an annual production of 6 million tonnes, it is a major commodity chemical product.
Sodium sulfate is mainly used for the manufacture of detergents and in the Kraft process of paper pulping. About two-thirds of the world's production is from mirabilite, the natural mineral form of the decahydrate, and the remainder from by-products of chemical processes such as hydrochloric acid production.
Anhydrous sodium sulfate is widely used in the manufacture of sodium sulfide, sodium silicate etc.; also used in the making of sulphate pulping the paper making industry; as filler in dyeing industry; as dyeing auxiliary in printing & dyeing industry; also used in synthetic fibers, leather making, enamel and soaps etc.

Lithium sulfate anhydrous

Application : Mainly used to make special high strength glass, seasoning agents for food and synthetic drinks.

Packing : in plastic bag lined with PE bag, or according to customer's request.

CAS No.: 10377-48-7
Molecular Formula: Li2SO4appearance: white crystalline powder

Molecular weight: 109.94Density (at 20deg C): 2.22g/cm3 Melting Point: 859 deg C

Solubility in H2O (at 20deg C): 25.7 wt%

Technical Data:

Content: 99% min.

Fe2O3 content:  0.005% max

Moisture: 0.8% max

Na: 0.02% max.

Alkaline impurity: 0.1% max.

Insoluble matter: 0.01% max.

About Lithium sulfate

Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.

Lithium sulfate is soluble in water, though it does not follow the usual trend of solubility versus temperature — its solubility in water decreases with increasing temperature, as its dissolution is an exothermic process. This property is shared with few inorganic compounds, such as the lanthanoid sulfates.
Lithium sulfate crystals, being piezoelectric, are also used in ultrasound-type non-destructive testing because they are very efficient sound generators. However, they do suffer in this application because of their water solubility.
Lithium sulfate is used to treat bipolar disorder .

Li/CFx

FEATURES:
No voltage delay, with steady operation voltage.
OCV is between 2.8~3.2V, operation voltage would be changed with different loads (2.5~2.8V), cut off voltage is 2.0V.
Wide operation temperature range: -30℃ to 75℃.
Suited for large current continuous discharge and pulse discharge.
Long shelf life (up to 10 years), low self-discharge (less than 1% per year).

Feature of Li/SOCL2

Great output, steady operation voltage and wide temperature range.
OCV is between 3.6~3.7V, operation voltage would be changed with different loads (3.1~3.5V), cut off voltage is 2.5V.
Wide temperature range of operation from -45℃ to 75℃.
Suited for large current continuous discharge and pulse discharge.
Excellent shelf life (10 years), low self-discharge (1% or less per year).
Lithium batteries are disposable (primary) batteries that have lithium metal or lithium compounds as an anode. They stand apart from other batteries in their high charge density (long life) and high cost per unit. Depending on the design and chemical compounds used, lithium cells can produce voltages from 1.5 V (comparable to a zinc–carbon or alkaline battery) to about 3.7 V.
Buy Li/SOCL2

Lithium metal ,industrial grade

Appearance : Metallic silver substance
Atomic weight : 6.94
Density : 0.534g/cm3
Melting points : 180.5°C
Boiling Point : 1317°C
Hardness(Mohs) : 0.6
Volume increase on melting : 1.51%
Application :
Mainly used in synthetic rubber and pharmaceutical industries
Packing :
Vacuum wrapped with aluminum foil plastic bag and put in dry steel drums. The ingots, foils, rods, upon customer request.
Transportation :
 Post, parcel   Not acceptable
 Sea   Class 4.3, UN No. 1415
 Road,Rail   Class 4.3, UN No. 1415
 Air        15kgs/unit package max, Cargo aircraft only
Caution :
Lithium metal easy reaction with oxygen and nitrogen in wet air, easy burns or explodes when contact with water.
Lithium metal ,industrial grade

N-butyl lithium in hexane

Molecular Formula : n-C4H9Li
Appearance : Clear, colorless to yellow solution
Molecular weight : 64.06
Density : 0.68g/ml@20°C
Contained BuLi : 102g/l
Pyrophoricity : Pyrophoric
Application :
Mainly used as catalyst of organic reaction
Packing : According to customer's request
Transportation : 
 Post, parcel, Air Not acceptable
 Sea   Class 4.2, UN No. 2445
 Road,Rail   Class 4.2, UN No. 2445
Caution :
Pyrophoric liquid, can catch fire if exposed to air. Reacts violently with water to give off flammable gases and corrosive dusts. Keep away from water, air, and oxidizing materials. Keep away from heat, sparks and flame. Protect storage container from leaks and physical damage.

The Introduction of Anhydrous sodium sulfate

Anhydrous sodium sulfate , as well acknowledged because Glauber's salts , sodium sulphate ;coming into court: Andrew Dickson White undifferentiated amercement corpuscles or powderise . Inodorous , piquant and with a acerbic discernment .concentration : 2.68g/atomic number 96.Disappearing channelise of 884 ℃. Answerable inward body of water , solubility inside the 0-30.foursome ℃ chop-chop with accelerative temperature . Answerable inward glycerin , incomprehensible in fermentation alcohol. Resolution was colorless . When the resolution comprises chthonic than thirty-two.thirty-eight ℃ , comes in tenner monohydrate crystallisation . More eminent than xxxii.thirty-eight ℃ sets about with anhydrous sodium sulphatestallization .

Applications
Mainly used for drying organic solvents except water, in addition to the effect of water fast , remaining less so . Dyes and additives can also be used as a filler to adjust the concentration of dyes and additives , so that up to standard levels . Also be used as direct dyes , sulfur dyes , vat dyes in the dye -promoting agent when cotton , silk dyeing direct and acid dyes in wool and animal fibers of slow dye , printed silk fabrics are also used when refining the background protective agent . Manufacture of kraft pulp and paper industry as a cooking agent when . Pharmaceutical industry as a barium salt poisoning antidote. In addition, for the glass , the construction industry and so on.

The uses of sodium bromide

sodium bromide can treat as medicine (a sedative). sodium bromide in vivo from bromine ions, a solution to the latter can enhance the cerebral cortex inhibition, conduction sedative function, and excitement and inhibit process and the balance of the disorder is back to normal. Bromine ion to the feeling of the cerebral cortex area and the sports section are the inhibition. Therefore, to generate the sedative function at the same time, there are certain anticonvulsants role. This product and caffeine can restore excited with five and inhibition of balance, coordination between organs, to some extent, it can alleviate stomach spasms, reduce abdominal pain symptoms. Mainly used to alleviate clinical symptoms of encephalitis caused excited, save the pig, poultry salt poisoning (appropriate USES brominated calcium). In the animal, can use of abdominal pain, bromine mixture adjuvant therapy. Long distance transportation horses, can use this product do sedative.