The Introduction of PA6 1013B

Name: PA6 1013B (PA6) Molecular formula: [-NH-(CH2) 5-CO] n-traits: milky white translucent or near crystalline polymer that features: thermoplastic, light weight, toughness, resistance to chemicals and durability burning methods of identification: blue yellow flame, burning smell solvent plant experiments: anti-cyclohexanone and aromatic solvent density: 1.13g/cm3 melting point: 215 ℃ thermal decomposition temperature:> 300 ℃ equilibrium water absorption: 3 0.5% with good wear resistance, self lubrication and solvent resistance. Density: (g/cm3) 1.14-1.15 Melting point :215-225 ℃ Tensile strength:> 60.0Mpa Elongation:> 30% of the bending strength: 90.0Mpa notched impact strength: (KJ/m2)> 5 PA6 Applications : Industrial production in the pan for the manufacture of bearings, round gears, cams, bevel gear, a variety of rollers, pulleys, pump impellers, fan blades, worm gear, propeller, screw, nut, washer, high pressure seals, oil seals film, oil containers, housings, hose, cable jacket, shearing machine pulley sets, shaper slider, electromagnetic distribution of seats, cold Chen equipment, gaskets, bearing cage, cars and tractors on various pipeline , Detroit, ropes, belts, textile machinery and industrial equipment, zero fog materials and commodities and packaging films.
Chemical and physical properties:
PA6 and PA66 chemical physical characteristics very similar, however, its low melting point, and the process temperature range is very wide. Its impact resistance and anti-solubility better than PA66, but also more moisture. Because many of the quality of plastic parts will be subject to moisture absorption characteristics of the impact, so use the PA6 design of the product to fully take this into account. In order to improve the mechanical properties of PA6, often adding a variety of modifiers. Glass is the most common additive, and sometimes also added to improve impact resistance synthetic rubber such as EPDM and SBR, etc. For products without additives, PA6 shrinkage of 1% to 1.5%. Glass fiber additives can reduce the shrinkage to 0.3% to 0.5% (but perpendicular to the direction and process even slightly higher). Forming the main assembly of the shrinkage and moisture absorption by the material crystallinity effects. Shrinkage and also the actual design of plastic parts, wall thickness and other process parameters as a function of.


Read more: PA6 1013B for sale

The Introduction of ASA 778T

ASA 778T, even if no coating protection, heat in cold environments, but also has exceptional durability. Outdoor applications, GELOY resin even if long-term exposure to UV, wet steam, heat, cold and shock, can still maintain its color stability. It can be hot molding (injection molding and blow molding can be).
ASA sheet molding grade resin can be used as a large structure, such as spa pools, swimming pool ladder, and other recreational applications. Senior GELOY series with improved appearance of the properties of plastic, color selectivity, good chemical resistance, temperature resistance and improved processing performance.
ASA resin has: outdoor weathering capabilities, can be mixed (combined transfer of raw materials), high temperature - RTI up to 125 ° F (50 ° C), HDT up to 220 ° F (104 ° C) (Ebony), high gloss, color stability, UV stability, chemical agent resistance
ASA resin Typical applications include: automotive view mirror housings and exterior trim after assembly, window and door profile line of solid extruded profiles, extruded housing siding and windows were reconciled with the raw materials, rain water tank system and side fences, vending cargo decoration, entertainment vehicles (RV), travel trailers and motor vehicles housing components, spa pool, swimming pool ladder, garden tractors, snowmobiles, small water transport equipment enclosure。


Read more: ASA 778T for sale

The Introduction of TPU 345

TPU (Thermoplastic polyurethanes) name for the thermoplastic polyurethane elastomer rubber, this material can be softened to some Redu, and at room temperature can be maintained. With more than the shoes on the stable support role.TPU is thermoplastic polyurethane, a polyester-and polyether type of points, it is the hardness range (60HA-85HD), wear-resistant, oil resistant, transparent, flexible, and the daily necessities, sporting goods, toys, decorative material, and is widely applications, halogen-free flame retardant TPU soft PVC can also be replaced to meet the growing field of environmental protection requirements. TPU grades of many brands of varying quality, choose TPU After a detailed assessment of the best arguments, or can not be cost-optimal results. TPU of this material can be softened to some Redu, and can be maintained at room temperature . with more than the shoe stable, supporting role. TPU, also known as urethane rubber, a polyurethane, relatively new in the country when the product is widely used in shoe-making industry, pipe … and other industries.
TPU’s main features are:
Wide range of hardness: TPU by changing the ratio of the reaction components, you can get different hardness of the product, and with the increase in hardness, and its products still maintain good flexibility and abrasion resistance.
High mechanical strength: TPU products, carrying capacity, outstanding impact resistance and shock absorption.
Cold outstanding: TPU glass transition temperature is relatively low, at minus 35 degrees still maintain good elasticity, flexibility and other physical properties.
Processing performance: TPU thermoplastic material can be a common processing method for processing, such as injection molding, extrusion, rolling, and so on. At the same time, TPU polymer materials with certain properties can be processed together complementary polymer alloy.
Oil, water, mold-resistant. Recycling is good.
Use
The use of a variety of TPU moldings: auto parts ball coupling; dust cover; pedal brake; locks the firing pin; bush leaf spring bushing; bearings; shock components; both interior and exterior parts; anti-skid chains and other mechanical industrial parts of the gear; seals (mainly from the role of wear and oil); shock components; modulus pin; bush; bearing cap category; connector; rubber sieve; printing roller and other clothing accessories women bra straps, clothing such as elastic. Footwear softball shoes, baseball shoes, golf shoes, football shoes, shoe soles and heel forefoot women; boots; safety boots, high shoes, and other self-bit round; handle; strap high-pressure hose pipes and other pipes; medical tube ; hydraulic tube; pneumatic tube; fuel pipe; coated pipe ducts; fire hose and other thin-film plate rotational band (with some stretching effect); air; membrane; keyboard plate; composite fabric and other electrical wire and cable communication cables; computer wiring; car wiring; exploration cables and other lines of the ring; round with; V-belt; belt; skid tank with other calendar software, cans; film composite sheet material and other bags blow box class of vehicles; a variety of container types blown thin, wide-format film (medical, hygiene supplies) solution welding materials; adhesive; artificial leather, synthetic leather, rope, wire, coated gloves, etc.


Read more: TPU 345 for sale

The Introduction of PP 5090T

Product name:PP 5090TLevel: random copolymer injection grade; food grade;
Uses: high transparent containers, household items, food containers, transparent collection box;
Features: Complies with FDA 21 CFR 177.1520 requirements. High transparency, chemical resistance, good quality drugs;
(1) Physical properties: Polypropylene is non-toxic, odorless, tasteless white high crystallinity of the polymer, the density is only 0.90-0.91g / m, is the lightest of all varieties of plastic.
(2) mechanical properties: resistance to bending fatigue.
(3) thermal performance: PP has good heat resistance, melting point at 164-170 ℃, 100 ℃ for products in the temperature sterilization, without external forces, 150 ℃ is not deformed. Embrittlement temperature of -35 ℃, below -35 ℃ embrittlement occurs, cold resistance than polyethylene;
(4) electrical properties: high frequency polypropylene insulation performance, because it is almost non-absorbent, so the insulation from humidity and it has a higher dielectric constant and temperature increases, heat can be used to make electrical insulation products, it is also very high breakdown voltage, suitable for electrical accessories, anti-voltage, arc resistance is good, but the static and high copper contacts is easy with aging;
(5)weather resistance: very sensitive to UV polypropylene, adding zinc oxide, thio Dilauroyl acid ester, carbon black or similar white fillers can improve its anti-aging properties;
Uses:
(1) film products;
(2) injection molding products: can be used for automotive, electrical, mechanical, instrument, radio, textile, national defense and other engineering accessories, daily necessities, turnover box, medical equipment, construction materials;
Extruded products: do pipes, profiles, monofilament, fishing rope, packing tape, tied belay, textile bags, fiber, composite coating, sheet, plate it, etc. blow molding products, a variety of small containers;


Read more: PP 5090T for sale

The Introduction of ABS 717C

ABS 717C ，ABS copolymer, acrylonitrile, butadiene and styrene, its heat resistance and solvent resistance than HIPS better. In addition, it also has the glass. Because Cyantic polAcrylonitrile, themutual PS chain action, is strengthened. Therefore, impact strength, tensile strength and surface hardness of ABS, better than the HIPS.
Generally speaking, a higher percentage of acrylonitrile, better heat resistance, hardness and resistance to solvent, however, worse flow character; The basic color was a bit of a plastic yellow, but at the same time injection molds, its mechanical properties and dimensional stability are very good. Due to the above advantages, ABS resin and become a good engineering plastic.
 ABS resin is the most diversified copolymer, acrylonitrile, butadiene styrene and market. Our unique technology has its special ABS resin of matching and assembly strength, stable, and processing power. Quality, color and appearance of dyeing , win customer trust.
Our company is widely accepted and used to in machinery, electronic parts, communication equipment, computer, electric appliance, auto parts, wei yu, boot, faucet and other household items. POLYLAC ® covers market all kinds of specifications, and has already passed UL and C-UL approval. A general level, high flow level, extrusion level, flame retardant grade, high heat resistance level and transparent level, specifications, can be readily available. In addition, it is also responsible for coordination blossom a new class, to develop new market and new purpose.
Supply ABS 717C injection level. High-pitched red, high impact strength. Usage: kitchen appliances, audio products, toilet seat, washing machine, vacuum cleaner housings, tool handles and other accessories. Important parameters: melt flow rate: 1.4 g/10min density: 1.04 g/cm3 notched impact strength: 28 Tensile strength: 44 MPa Elongation at break: 25%.

Read more: ABS 717C for sale

The Introduction of F30-03 POM

F30-03 POM is mianly for engineering products for general use.POM (English: polyformaldehyde) crystalline thermoplastic polymer. Known as the “super steel” or “race of steel”, also known as polyoxyethylene methyl. Structure, the English abbreviation for the POM. Usually derived from the polymerization of formaldehyde polymer, the degree of polymerization is not high, and the vulnerable thermal depolymerization.
POM is a no side-chain, high-density, high-crystalline linear polymer with excellent performance. POM is a smooth, shiny, hard and dense material, yellow or white, in the -40-100 ° C temperature range, long-term use. Its wear resistance and self-lubricating plastic is superior than most, and good oil resistance, peroxides performance. Very acid, alkali and intolerance intolerant solar ultraviolet radiation. POM tensile strength 70MPa, water absorption, dimensional stability, glossy, the good performance than nylon, POM is a highly crystalline resin, the thermoplastic resin is the toughest. With thermal strength, flexural strength, fatigue resistance of high intensity, abrasion resistance and excellent electrical properties.
General synthesis of POM aqueous solution of formaldehyde in the presence of acid condensation polymerization. Received more than 100 degree of polymerization of a-POM, and then broken down into formaldehyde gas heated by the refined and dehydration, often using some of the pre-polymerization of purified monomer, and then pass into the initiator containing a small amount of solvent in the dry polymerization. Because of the presence of water, so that a significant reduction in molecular weight. Initiator can be a Lewis acid or alkali. But most of the anion with tertiary amine addition polymerization, the reaction is as follows: POM acetal end groups of a half (-CH2OH), when the temperature is higher than 100 ℃, end-easy to break, the general subject that the stability of end-processing of. Stabilization can be heat treated to 230 ℃. Paraformaldehyde in 170 ~ 200 ℃ temperature processing, such as injection, extrusion, blow molding, etc. Mainly used for engineering plastics for the automotive, mechanical parts and so on.
Polyoxymethylene (pom) is an excellent engineering plastics, in foreign countries have “wins Steel”, “2 POM products
Super steel, “said. Pom with similar metal hardness, strength and rigidity, in a wide range of temperature and humidity have a good self-lubricating, good fatigue resistance, and resilient, it also have better chemical resistance. pom below the cost of many other engineering plastics, is replacing some of the traditionally occupied by the metal markets, such as alternative zinc, brass, aluminum and steel production in many parts, since its inception, pom has been widely used in electrical and electronic, mechanical, instrumentation, daily light industry, automobile, building materials, agriculture and other areas in many new areas of applications such as medical technology, sports equipment, etc., pom also showed good growth .

Read more:F30-03 POM  for sale

More about:http://www.plastic-materials.net/News/aa1

The Introduction of ABS 15A1

AG15A1 meet UL, FDA, SGS and environmental requirements of the inspection standard high gloss, medium impact resistance toys, clock case, sound case, suitcase, appliance housings.ABS 15A1 ABS plastic chemical name: Acrylonitrile – butadiene – styrene copolymer English Name: Acrylonitrile Butadiene Styrene weight: 1.05 grams / cubic centimeter molding shrinkage 0.4-0.7% molding temperature :200-240 ℃ dry conditions: 80 -90 ℃ 2 hours Operating temperature: -50 ~ +70 ℃
Features
1, the overall performance is better, high impact strength, chemical stability, good electrical properties.
2, and 372 glass of good welding, plastic parts made of color, and can be chrome plated, paint treatment.
3, there are high impact, high heat resistance, flame retardant, enhanced level of transparency and so on.
4, more mobile than HIPS almost, than PMMA, PC and other good, good flexibility. Uses: suitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components. Molding characteristics
1) amorphous materials, liquid medium, large moisture, must be fully dry, the surface gloss of the plastic parts required to be a long dry and warm 80-90 degrees, 3 hours.
2) should take the high melt temperature, high mold temperature, but too easy to break down the material temperature (decomposition temperature> 270 degrees). For high precision plastic parts, mold temperature should take 50-60 degrees, high gloss. Resistance thermoplastic parts, mold temperature 60-80 degrees should be taken.
3) the solution folder for watermarks, the need to improve material flow, material to high temperature, high mold temperature, or change into water and other methods.
4) such as forming heat-or flame-retardant grade material, production 3-7 days after the remnants of the plastic mold surface decomposition, leading to the mold surface shiny, take time to clean up the mold, the mold surface, while the need to increase the exhaust position.
ABS resin is the largest output, the most widely used polymer, which PS, SAN, BS various performance organic unity, both tough, hard, just fine with balanced mechanical properties. ABS is acrylonitrile, butadiene and styrene copolymer, A representative of acrylonitrile, B stands for butadiene, S for styrene. ABS plastic is generally opaque, and the appearance of pale ivory, non-toxic, tasteless, both tough, hard, just the characteristics of slow burning, the flame was yellow, with black smoke, combustion of plastic softening, scorching, issued a special cinnamon smell, but no melt drip phenomenon. ABS engineering plastic with excellent overall performance, with excellent impact strength, dimensional stability, electrical properties, abrasion resistance, chemical resistance, dyeing, molding and machining better. ABS resin, water, inorganic salts, alkalis and acids, alcohols and insoluble in most hydrocarbon solvents, and easily soluble in aldehydes, ketones, esters and some chlorinated hydrocarbons.
ABS plastic shortcomings: a low heat distortion temperature, flammable, weather is poor. Acrylonitrile – butadiene – styrene polymer grade ABS parts described Name Type Origin refers g/10min melting characteristics and uses 9715A Jilin 16 for cars, home appliances, electronic products shell accessories, toys, daily necessities and other industries and products. 0215A Jilin 20 for cars, home appliances, electronic products, shell accessories, toys, daily necessities and other industries and products. 750 4.5 Daqing Petrochemical are easy mobility, OA equipment, groceries, etc. 301 Portland 1.3-2.3 for a variety of common machine shell parts, household appliances, lamps, sundries. 510 Liaoning Huajin 2.5 for the automotive, home appliances, electronic products shell accessories, toys, daily necessities and other industries and products. 757K Zhenjiang Chimei 4.2 front of the TV shell, shell copier, telephone machine shell, cosmetic box 707K Zhenjiang Chimei 1.9 phone shell, lamp, toys, office supplies, household appliances button. 757 Taiwan Chi Mei 1.8 front of the TV shell, shell copier, telephone case, cosmetic case 747 of the original white 0.8 Taiwan Chi Mei helmets, motorcycle baffle, heel, snow sports goods and other magnetic white 747 Taiwan Chi Mei 1.2 high strength, injection molding. 777D Chimei of Taiwan 6 ultra heat-resistant. 777B Chimei of Taiwan 6.5 heat resistance and good transparency 758 Taiwan Chi Mei Chi Mei Taiwan 765B 4.2 flame resistance, light resistance, heat resistance. South Korea’s Kumho 750 4.5 home appliances, auto parts. GP-22 BASF 13-23 home appliances, auto parts. 121H South Korea’s LG 20 vacuum cleaners, blenders AG15A1 Ningbo Formosa Chemicals heels, toys, clocks and speaker enclosure, suitcases, etc.

Read more ：ABS 15A1 for sale

More about:http://www.plastic-materials.net/News/aa2

The Introduction of ABS 777D

ABS 777D,Acrylonitrile – styrene – butadiene copolymer, abbreviated ACRYLONITRILE BUTADIENE STYRENE（ABS） is an acronym, is a high strength, good toughness, easy processing of forming thermoplastic polymer material is acrylonitrile (ACRYLONITRILE), 1,3 – butadiene (BUTADIENE), styrene (STYRENE) three kinds of monomers of the graft copolymer, suitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.
Feature1, the overall performance is better, high impact strength, chemical stability, good electrical properties.
2, and 372 glass of good welding, plastic parts made ​​of color, and can be chrome plated, paint treatment.
3, there are high impact, high heat resistance, flame retardant, enhanced level of transparency and so on.
4, more mobile than HIPS almost, than PMMA, PC and other good, good flexibility.
Usessuitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.
Molding characteristics1 amorphous materials, liquid medium, large moisture, must be fully dry, the surface gloss of the plastic parts required to be a long dry and warm 80-90 degrees, 3 hours.
(2) should take the high melt temperature, high mold temperature, but too easy to break down the material temperature (decomposition temperature> 270 degrees). For high precision plastic parts, mold temperature should take 50-60 degrees, high gloss. Resistance thermoplastic parts, mold temperature 60-80 degrees should be taken.
3 Watermark folder for solutions, the need to improve material flow, material to high temperature, high mold temperature, or change into water and other methods.
4, such as forming heat-or flame-retardant grade material, production 3-7 days after the remnants of the plastic mold surface decomposition, leading to the mold surface shiny, take time to clean up the mold, the mold surface, while the need to increase the exhaust position.

Read more：ABS 777D for sale

More about:http://www.plastic-materials.net/News/aa3

The Introduction of EVA E180F

EVA E180F is the new environmental protection plastic packing material, has the good cushion, the earthquake resistance, the heat preservation, moisture-proof, experiments the academic society anti-corrosive and so on, and has the non-toxic evil, does not absorb water. It may use in processing the design, shocks proof the performance to compare the polystyrene (froth) and so on tradition packing materials, it also meets the environmental protection requirement.

EVA resin is widely used. In general, vinyl acetate content of 5% or less of the EVA, its main products are film, wire and cable, LDPE modifiers, adhesives, etc.; vinyl acetate content of 5% to 10% of EVA products as flexible films, etc.; vinyl acetate content of 20 ~ 28% of EVA, is mainly used for hot melt adhesives and coatings products; vinyl acetate content of 5% to 45%, mainly products for the film (including agricultural film) and sheets, plastic injection, molding products, foam products, hot melt adhesives. Such as:
(1) films, sheets and laminated products: with sealing, adhesion, flexibility, strength and toughness, tight, suitable for flexible packaging film, shrink film, agricultural film, food packaging film, laminated film, you can use do polyolefin laminated film in the middle layer.
(2) General supplies: with flexibility, resistance to environmental stress cracking resistance, weather and good benefits for industrial electrical wire insulation material bag, accessories for electrical appliances, windows and sealing materials.
(3) grocery class of sporting goods, toys, cushions, straps, sealed container, cover, EVA rubber football.
(4) Auto Parts have shock absorbers, fender, both interior and exterior car accessories.
(5) Foam Products: pressure foam with foam slippers, sandals, construction materials. There are a variety of industrial plastic foam parts, female soles, hot melt adhesives.
EVA molding process
EVA can be injection molding, extrusion, blow molding, calendering, rotational vacuum thermoforming, foam, coating, sealing, welding, molding process.
EVA rubber and plastic products can be processed by the design shape, the shock better than polystyrene (foam) and other traditional foam materials and meet environmental requirements, is the best choice for export products. Packaging can be cut relative to the shock, forming; quite different because of the density can also have a wider range of uses.
EVA rubber and plastic products is a new environmental protection plastic foam materials, with good cushioning, shock, heat, moisture, resistance to chemical corrosion, etc., and non-toxic, non-absorbent.
EVA features
Water resistance: closed cell structure, non-absorbent, moisture-proof, water resistance is good.
Corrosion resistance: resistance to water, oil, acid, alkali and other chemicals, corrosion, anti-bacterial, non-toxic, tasteless, non-polluting.
Processing: hot and easy to make, cutting, gluing, laminating and other processing.
Shockproof: High flexibility and tensile strength, toughness, and has a good shock / buffer performance.
Insulation: insulation, thermal insulation and cold temperature performance, may be resistant to cold and exposure.
Sound insulation: closed foam, sound effect.

Read more:EVA E180F for sale

More about:http://www.plastic-materials.net/News/aa4

The Introduction of PEI 1000

PEI 1000 , combined with advanced polymers show an excellent thermal , mechanical and electrical properties , together with low flammability and low smoke evolution during combustion . These features make the 1000 ideal for Pei electrical / electronic insulators and for many components , high strength, rigidity requires a higher temperature .

PEI gas release is low, can be used for aircraft / aerospace industry internal documents PEI 1000-7101: PEI is the chemical structure of aromatic amide and ether sub- unit formed on the basis of repetition , are stable for many chemicals , such as the vast majority of hydrocarbons, alcohols , all halogenated solvents, halogenated solvents dissolve special . PEI 1000-7101: PEI glass fiber , carbon fiber or other fillers can be modified to enhance the purpose .

 

Read more: PEI 1000 for sale

More about:http://www.plastic-materials.net/News/aa5

The Introduction of Plastic PPS

Plastic PPS is a kind of special engineering plastics , pps plastic called poly phenyl sulfide , polyphenylene sulfide . Molecular main chain of the thermoplastic resin with a phenylthio English called polyphenylene snlfide ( referred to as PPS), that is, we often say pps plastic .

PPS engineering plastic is crystallization type (crystallinity of 55%-65%) of the high rigid white powder polymers, high heat resistance (for using temperature of 240 ℃) and mechanical strength, rigidity, difficult to burn sex, anticorrosion chemical resistance, electrical properties, all the fine resin dimension stability, wear resistance, resistance to creep degeneration optimal, flame retardancy optimal. Have self-extinguishing RTV silicone compound. Up to UL94V-0 level, high temperature and high performance to maintain good still. Liquidity is good, easy molding, forming almost no shrinkage concave spot. And all kinds of inorganic packing material has good affinity. Enhance after modification may raise its physical and mechanical mechanical properties and heat resistance (the heat distortion temperature), strengthen material with a glass fiber, carbon fiber, and calendaring aromatic polyamide fiber, metal fibers, etc, with glass fiber primarily. Inorganic stuffing have talc, kaolin, calcium carbonate, silica, mos2, etc.Polyphenylene sulfide (PPS) is a symmetrical crystalline polymers , rigid backbone chain consisting of p-substituted benzene ring and sulfur atom on the repeat . Plasma levels for a variety of coatings, fluidized bed , electrostatic spray , and injection and compression molding was provided. Polyphenylene show excellent chemical resistance to sulfide , thermal stability , size (or size) stability , fire . PPS 's extreme inertness of organic solvents and inorganic salts and bases for the outstanding performance of corrosion coatings for food contact .

Plastic PPS- the material properties1 , electrical insulation (especially high-frequency insulation ) fine , white hard and brittle , falling on the ground with metal sound , light transmittance behind plexiglass , color of water resistance , good chemical stability . Has excellent flame resistance , as non-combustible plastic .

2 , the general strength , good rigidity , but the crisp, easy to produce brittle fracture stress , impatience benzene gasoline and other organic solvents . Long-term use temperature of up to 260 degrees , 400 degrees in the air or nitrogen to maintain stability. By adding glass fiber or other reinforcing material modification, can greatly improve the impact strength , heat resistance and other mechanical properties also increased , the density increased to 1.6-1.9 , molding shrinkage rate to 0.15-0.25 % for smaller production of heat-resistant parts . insulation and chemical equipment. optical instruments and other parts .

The first generation of commercial grade polyphenylene sulfide (PPS) introduced the Phillips Petroleum in 1968, trade name Leiden . These are of two types , the high viscosity of a thermoplastic polymer branching by PTFE-type process , and began to linear polymer compressibility modulus . Subsequently, in 1973 in Europe , is the focus of the study shifted to injection molding and coating processes.

At present, China pps plastic composite pellets with modified total market demand is greater than 8000 tons / year , and growing rapidly , the annual demand growth rate of 15% -20 % . Consumer of PPS Model GM varieties still 0% -40 % glass fiber reinforced materials mainly applied to electronic appliances, precision machinery, automobile, motorcycle and petroleum , chemical industry consumption is steadily increasing . With China's electronics, the automotive industry 's rapid development , pps engineering plastics market prospect is extremely broad , China in 2005 is expected to PPS pellets market demand will reach 10,000 tons / year.

Plastic PPS at home and abroad and new material development trends in the development of new varieties pps plastic -like material , the development of new synthetic methods based PPS should also focus their efforts on the new modified materials and special materials research and development , and actively develop new PPS composite modified varieties , as soon as possible to establish a larger -scale production devices. Among them, as quickly as possible 5000-8000 tons / year of PPS resin production line , the development of engineering plastics in China pps priority . This is the development of China's high-performance structural materials necessary for strategic initiatives, restrictions on foreign technology and to break the blockade , to meet the economic and military high-performance structural materials in various areas of the needs of extremely important significance .

 

Read more：Plastic PPS for sale

The Introduction of ABS PA-707K

ABS PA - 707 - K is  high- gloss , high rigidity,

 

Basic performance

 

Melt flow rate:200℃5kg

Injection molding

Read more: ABS PA - 707 - K for sale

ABS 777D for sale

Product name is ABS 777 D characteristics, this product is a super heat resistance; The impact strength. ABS 777 D is super heat resistant level. The product is often used in the heat-generating household appliances shell, hair dryer, iron shell; Fan heater and auto parts.
Describes some of the raw materials of the specification level: super Heat.ABS 777 D is widely used in electric appliance heating, hair dryer, iron shell, heater, car parts such as the instrument panel, grille, etc.


Read more:http://www.plastic-materials.net/

PA-747 ABS for sale

Product name is PA-747 ABS the characteristics of this produt high impact strength, it is the emergence of the white. PA-747 ABS is often used in the lining of the refrigerator



Read more:http://www.plastic-materials.net/

ABS PA-757 for sale

Product name:ABS PA-757

Features:high rigidity,high glossiness,medium impulse strength

Specification:universally used

Application:The front shell of  television,the shell of copier,the shell of telephone set,the cosmetic box and hubcap.
Read more:http://www.plastic-materials.net/

ABS PA-707K for sale

Product name:ABS PA-707K

Features:High glossiness ,high rigidity

Specification:Injection molding

Read more:http://www.plastic-materials.net/

ABS 740 for sale

Product name:ABS 740

Features:Good Adhesion
Good Dimensional Stability
High Gloss
High Impact Resistance
Forms:Pellets

Application:Automotive Applications;Automotive Exterior Trim;Safety Helmets;Toys.

Read more:http://www.plastic-materials.net/

ABS AG12A0 for sale

Product name:ABS AG12A0

Features:high shock resistance

Specification:General

Application:The hell of a shoe;toys;the shell of clocks;suitcase;the inner shell of refrigerator.

Read more:http://www.plastic-materials.net/

ABS 0212A for sale

Product name:ABS 0212A

Features:high shock resistance

Appearance:ultra white with high gloss

Specification:high shock resistance grade

Read more:http://www.plastic-materials.net/

ABS 15A1 for sale

Product name:ABS 15A1
The Features of this product is high gloss,high impact resistance and white with small granular .It is mainly applied to the heels,toys, the shell of clock,suitcase and the peripheral of sound appliance.
Read more：http://www.plastic-materials.net/

HAG7220 for sale

Product Name:HAG7220

Features:20% GF reinforced
Specification:Transparent Grade

Read more:http://www.plastic-materials.net/