The Use of 80N PMMA

80N PMMA with high heat resistance, good mechanical properties, transparent hygiene, weather resistance, surface hardness and excellent chemical resistance, heat resistance for products; PMMA is a colorless, transparent, plastic light transmission rate is the best, higher than the glass, the light through the range; reflectivity with the incident and change the absorption rate of light is small, do total reflection. When the PMMA carrier (plates, rods) curvature <48 ° when the light transmission; isotactic polymer is random type, but there are isolated short-range ordered, crystalline product which stretched conformation oriented, have good resistance to crazing resistance, crazing growth and impact toughness; light, tough, at room temperature under high mechanical strength, but also by the temperature effect is small, only when close to the softening point and TG was dramatically decreased when the intensity; surface gloss good, strong coloring, dimensional stability, surface hardness and resistance to nicks, but poor, low impact strength, good electrical properties, but decreased with increasing frequency, low water absorption, resistance to water-soluble inorganic salts and some rare acid resistance, long-chain alkanes, ethers, fats, oils, not alkali; anti-aging, non-toxic, combustion without flame;
Uses: PMMA can be used for aviation, aerospace, automobile, ship bulletproof glass, window glass, instrument accessories, sitting hatch; lights, instructions light, optical instruments, such as glasses, magnifying glass and a variety of lenses. Building materials such as color plates, advanced decorative materials, furniture, windows, partitions. Medical equipment such as orthopedic prosthetics, fake nose, fake eyes, medical light pipe, denture powder. Stationery, daily necessities, such as pen, drawing tools, teaching models, specimens, lamps, buttons, hair clips, candy dish, etc.;
PMMA by injection molding, extrusion, casting, casting, coating, bonding, molding plus craft molding process.

Read more: Buy A 80N PMMA

What is LG2 PMMA

PMMA (polymethyl methacrylate) English name: PolymethylMethacrylate. PMMA resin is non-toxic and environmentally friendly material that can be used to produce tableware, sanitary ware, etc., have good chemical stability, and weatherability. PMMA resin is not easy to produce sharp in broken fragments, the United States, Japan and other countries and regions have been made ​​mandatory in the law, schools and kindergartens architectural glass must be used PMMA resin. At present, all over the country to speed up the pace of urban construction, street signs, advertising light boxes and telephone booths, large numbers, in which a considerable portion of the material used is PMMA resin. Beijing Olympic project building outdoor color green also makes extensive use of PMMA resin.Gather methyl methacrylate (mma), with acrylic acid and its ester polymerization of acrylic polymer referred to get such tree ester, corresponding plastic collectively polyethylene acid plastic, among them with poly (methyl propylene methyl ester most widely used. Gather methyl methacrylate (mma) abbreviation code PMMA, plexiglass, is by far the most transparent material texture synthesis of excellent, price and more suitable varieties. Application: PMMA soluble in organic solvent, such as phenol, benjia ethers, through the spin coating can form a good film, has the good dielectric properties, as there is an airport effect tube (OFET) is also called the organic thin-film transistors (OTFT) medium layer.
Typical Applications
Automotive industry (equipment, lights, instrument panel, etc.), pharmaceutical industry (blood storage containers, etc.), industrial applications (DVD, light scattering device), key electronic products (especially transparent). Consumer goods (beverage cups, stationery, etc.). PMMA dissolved in organic solvents, such as phenol, anisole, etc., can be formed by spin-coating a good film with good dielectric properties, can be used as organic field effect transistor (OFET), also known as organic thin film transistor (OTFT) dielectric layer .
Chemical and Physical Properties
PMMA has good optical properties and resistance to climate change features. White light penetrating up to 92%. PMMA products with very low birefringence, particularly suitable for making VCDs. PMMA has a room temperature creep. As the load increased, the time growth can lead to stress cracking phenomenon. PMMA has good impact properties. As the PMMA surface hardness is not high, easy to clean hair, low-impact resistance, molding defects and poor flow properties, PMMA modified one after another. Such as methyl methacrylate and styrene butadiene copolymer, PMMA and PC blends and so on. Super transparent PMMA material mainly used for mobile protection screen, the product is divided into a hardening coating, without curing the coating two. It features excellent light transmission rate, impurities, electrostatic protective film, the surface hardness after hardening up thick 5-6H above present especially recommended for hardening of the PMMA material, the domestic as health board.



Read more: Buy A LG2 PMMA

 

What is VH001 PMMA

VH001 PMMA has the best heat resistance, weather resistance. For vehicles, lighting, optical products. MF001 Nantong Rayon, has excellent mobility, for large or thin molded product molded products. Main uses: grocery, household appliances lighting.VH001 resistance of acrylic company long-term supply polyester butyl acetate PBT terephthalic acid. The company business PMMA Germany evonik degussa 6 N, quality assurance.
1. Supply PMMA Taiwan chi mei high liquidity CM-211; Heat resistant level CM-205; General level CM-207;
2. Supply PMMA zhenjiang chi mei CM-211, 205- CM, CM-207;
3. Supply PMMA Korean LG IF850 general level, IG840, EH910, EF940;
4. Ruby colour, supply PMMA British general level CP-51 A, CP-61 A, CP-81 A;
5. Supply PMMA arkema thermal resistance V150, V020; High temperature resistant V040 excellent wear resistance, V825;
6. Supply PMMA nantong li Yang impact resistance general level MF001; Heat resistance of climate resistance VH001; Setting the level TF8, VH5; IRD70, MD001, VH150
7. Japan’s sumitomo supply PMMA resistance to impact HT55X; Heat resistance MH; LG2, LG, TH50Y;
8. Supply PMMA Japan as a climatic 560 F into resistance; Injection class 80 N;
9. Supply PMMA mitsubishi li Yang impact resistance VRL40; Setting the level TF8, VH5; Heat resistance of climate resistance VH001; High IRH70 blunt, IRD70, MD001,
10. Supply PMMA Germany degussa 5 N, 7 N, 8 N, 7 H, 7 M, 8 H, 8 NDF23.
11. Supply PMMA ebon T-80 Taiwan
Properties: FeiJingTi polymer, 92% light transmittance, the thermal denaturation temperature between 74 ° C ~ 102 ° C in between.
Advantages: 1, highlights learn transparency; 2, good cold; 3, better rigidity; 4, easy dyeing.
USES: chimney, window, sign, optical lens, hard contact lenses, car parts.


Read more: Buy A VH001 PMMA

The Application of LDPE FB3000

LDPE FB3000 is mainly used for transparent bag, film, car packaging, heavy bags, shrinkage filmDegree of low-density polyethylene polyethylene (LDPE) is a plastic material, it is suitable for a variety of molding thermoplastic molding process, forming good. LDPE mainly used for thin-film products, but also for the injection molding products, medical devices, pharmaceutical and food packaging materials, blow molding products.
Linear low density polyethylene (LLDPE), ethylene and a small amount of high-level α-olefins (such as butene, hexene, octene-1, four methyl pentene-1, etc.) in the catalyst, the high or low pressure polymerization of a copolymer, the density is 0.915 ~ 0.940 g / cc between. However, according to the ASTM D-1248-84 provisions, 0.926 ~ 0.940 g / cc density range is a medium density polyethylene (MDPE). A new generation of LLDPE density expanded to its plastic body (0.890 ~ ​​0.915 g / cc) and elastomers (<0.890 g / cc). But the U.S. Plastics Industry Association (SPI) and the U.S. Plastics Industry Council (APC) will only extend the scope of LLDPE plastic body, not including elastomers. The 1980s, Union Carbide and Dow Chemical Company to its early sales of plastic and elastomer called very low density polyethylene (VLDPE) and ultra low density polyethylene (ULDPE) resin. General molecular structure of LLDPE is characterized by its linear main chain, only a few or no long-chain branching, but contains some of the short branched-chain. No long-chain branching to higher crystallinity of the polymer. Typically, LLDPE resin density and melt index to characterize. Density of the polymer chain, the concentration of comonomer decision. Comonomer in the polymer concentration determines the amount of short branched-chain. Short chain length depends on the type of comonomer. The higher the concentration of comonomer, the lower the density of the resin. In addition, the average molecular weight of the resin melt index is reflected mainly by the reaction temperature (solution method) and adding chain transfer agent (gas phase) to decide. Independent of molecular weight and molecular weight distribution, which mainly affected by the catalyst type. LLDPE in the 1970s by the Union Carbide Corporation of industrialization, it represents a polyethylene catalyst and process technology a major change, to make polyethylene significantly expanded range of products. LLDPE with a complex catalyst instead of free radical initiator, and a lower cost of low-pressure gas to replace higher-cost high-pressure polymerization reactor, in a relatively short period of time, then its superior performance and lower cost, in many field has been replaced by LDPE. Currently LLDPE into almost all of the traditional polyethylene market, including film, molding, pipe and wire and cable. LLDPE products non-toxic, tasteless, odorless, milky white particles. Compared with LDPE high strength, toughness, rigidity, heat, cold, etc., also has good resistance to environmental stress cracking resistance, tear strength and other properties, and acid, alkali, organic solvent. In 2005, China’s LLDPE production is 188 million tons, accounting for 35.5% of total PE; consumption of 3.55 million tons, accounting for PE 33.8% of total consumption. The next 2 to 3 years, LLDPE consumption will remain around 8% rate of continued growth. According to the current market price of 12,000 yuan / ton, the market size of China’s LLDPE has more than 400 billion yuan.



Read more: Buy A LDPE FB3000

The Use of LDPE FB3000

LDPE FB3000 is mainly used for transparent bag, film, car packaging, heavy bags, shrinkage filmDegree of low-density polyethylene polyethylene (LDPE) is a plastic material, it is suitable for a variety of molding thermoplastic molding process, forming good. LDPE mainly used for thin-film products, but also for the injection molding products, medical devices, pharmaceutical and food packaging materials, blow molding products.
Linear low density polyethylene (LLDPE), ethylene and a small amount of high-level α-olefins (such as butene, hexene, octene-1, four methyl pentene-1, etc.) in the catalyst, the high or low pressure polymerization of a copolymer, the density is 0.915 ~ 0.940 g / cc between. However, according to the ASTM D-1248-84 provisions, 0.926 ~ 0.940 g / cc density range is a medium density polyethylene (MDPE). A new generation of LLDPE density expanded to its plastic body (0.890 ~ ​​0.915 g / cc) and elastomers (<0.890 g / cc). But the U.S. Plastics Industry Association (SPI) and the U.S. Plastics Industry Council (APC) will only extend the scope of LLDPE plastic body, not including elastomers. The 1980s, Union Carbide and Dow Chemical Company to its early sales of plastic and elastomer called very low density polyethylene (VLDPE) and ultra low density polyethylene (ULDPE) resin. General molecular structure of LLDPE is characterized by its linear main chain, only a few or no long-chain branching, but contains some of the short branched-chain. No long-chain branching to higher crystallinity of the polymer. Typically, LLDPE resin density and melt index to characterize. Density of the polymer chain, the concentration of comonomer decision. Comonomer in the polymer concentration determines the amount of short branched-chain. Short chain length depends on the type of comonomer. The higher the concentration of comonomer, the lower the density of the resin. In addition, the average molecular weight of the resin melt index is reflected mainly by the reaction temperature (solution method) and adding chain transfer agent (gas phase) to decide. Independent of molecular weight and molecular weight distribution, which mainly affected by the catalyst type. LLDPE in the 1970s by the Union Carbide Corporation of industrialization, it represents a polyethylene catalyst and process technology a major change, to make polyethylene significantly expanded range of products. LLDPE with a complex catalyst instead of free radical initiator, and a lower cost of low-pressure gas to replace higher-cost high-pressure polymerization reactor, in a relatively short period of time, then its superior performance and lower cost, in many field has been replaced by LDPE. Currently LLDPE into almost all of the traditional polyethylene market, including film, molding, pipe and wire and cable. LLDPE products non-toxic, tasteless, odorless, milky white particles. Compared with LDPE high strength, toughness, rigidity, heat, cold, etc., also has good resistance to environmental stress cracking resistance, tear strength and other properties, and acid, alkali, organic solvent. In 2005, China’s LLDPE production is 188 million tons, accounting for 35.5% of total PE; consumption of 3.55 million tons, accounting for PE 33.8% of total consumption. The next 2 to 3 years, LLDPE consumption will remain around 8% rate of continued growth. According to the current market price of 12,000 yuan / ton, the market size of China’s LLDPE has more than 400 billion yuan.


Read more: Buy A LDPE FB3000

The Introduction of 80N PMMA

 

80N PMMA with high heat resistance, good mechanical properties, transparent hygiene, weather resistance, surface hardness and excellent chemical resistance, heat resistance for products; PMMA is a colorless, transparent, plastic light transmission rate is the best, higher than the glass, the light through the range; reflectivity with the incident and change the absorption rate of light is small, do total reflection. When the PMMA carrier (plates, rods) curvature <48 ° when the light transmission; isotactic polymer is random type, but there are isolated short-range ordered, crystalline product which stretched conformation oriented, have good resistance to crazing resistance, crazing growth and impact toughness; light, tough, at room temperature under high mechanical strength, but also by the temperature effect is small, only when close to the softening point and TG was dramatically decreased when the intensity; surface gloss good, strong coloring, dimensional stability, surface hardness and resistance to nicks, but poor, low impact strength, good electrical properties, but decreased with increasing frequency, low water absorption, resistance to water-soluble inorganic salts and some rare acid resistance, long-chain alkanes, ethers, fats, oils, not alkali; anti-aging, non-toxic, combustion without flame;
Uses: PMMA can be used for aviation, aerospace, automobile, ship bulletproof glass, window glass, instrument accessories, sitting hatch; lights, instructions light, optical instruments, such as glasses, magnifying glass and a variety of lenses. Building materials such as color plates, advanced decorative materials, furniture, windows, partitions. Medical equipment such as orthopedic prosthetics, fake nose, fake eyes, medical light pipe, denture powder. Stationery, daily necessities, such as pen, drawing tools, teaching models, specimens, lamps, buttons, hair clips, candy dish, etc.;
PMMA by injection molding, extrusion, casting, casting, coating, bonding, molding plus craft molding process.

Read more: Buy A 80N PMMA

The Use of LG2 PMMA

 

PMMA (polymethyl methacrylate) English name: PolymethylMethacrylate. PMMA resin is non-toxic and environmentally friendly material that can be used to produce tableware, sanitary ware, etc., have good chemical stability, and weatherability. PMMA resin is not easy to produce sharp in broken fragments, the United States, Japan and other countries and regions have been made ​​mandatory in the law, schools and kindergartens architectural glass must be used PMMA resin. At present, all over the country to speed up the pace of urban construction, street signs, advertising light boxes and telephone booths, large numbers, in which a considerable portion of the material used is PMMA resin. Beijing Olympic project building outdoor color green also makes extensive use of PMMA resin.Gather methyl methacrylate (mma), with acrylic acid and its ester polymerization of acrylic polymer referred to get such tree ester, corresponding plastic collectively polyethylene acid plastic, among them with poly (methyl propylene methyl ester most widely used. Gather methyl methacrylate (mma) abbreviation code PMMA, plexiglass, is by far the most transparent material texture synthesis of excellent, price and more suitable varieties. Application: PMMA soluble in organic solvent, such as phenol, benjia ethers, through the spin coating can form a good film, has the good dielectric properties, as there is an airport effect tube (OFET) is also called the organic thin-film transistors (OTFT) medium layer.

Typical Applications
Automotive industry (equipment, lights, instrument panel, etc.), pharmaceutical industry (blood storage containers, etc.), industrial applications (DVD, light scattering device), key electronic products (especially transparent). Consumer goods (beverage cups, stationery, etc.). PMMA dissolved in organic solvents, such as phenol, anisole, etc., can be formed by spin-coating a good film with good dielectric properties, can be used as organic field effect transistor (OFET), also known as organic thin film transistor (OTFT) dielectric layer .
Chemical and Physical Properties

PMMA has good optical properties and resistance to climate change features. White light penetrating up to 92%. PMMA products with very low birefringence, particularly suitable for making VCDs. PMMA has a room temperature creep. As the load increased, the time growth can lead to stress cracking phenomenon. PMMA has good impact properties. As the PMMA surface hardness is not high, easy to clean hair, low-impact resistance, molding defects and poor flow properties, PMMA modified one after another. Such as methyl methacrylate and styrene butadiene copolymer, PMMA and PC blends and so on. Super transparent PMMA material mainly used for mobile protection screen, the product is divided into a hardening coating, without curing the coating two. It features excellent light transmission rate, impurities, electrostatic protective film, the surface hardness after hardening up thick 5-6H above present especially recommended for hardening of the PMMA material, the domestic as health board.

Read more: Buy A LG2 PMMA

The Introduction of VH001 PMMA

VH001 PMMA has the best heat resistance, weather resistance. For vehicles, lighting, optical products. MF001 Nantong Rayon, has excellent mobility, for large or thin molded product molded products. Main uses: grocery, household appliances lighting.

VH001 resistance of acrylic company long-term supply polyester butyl acetate PBT terephthalic acid. The company business PMMA Germany evonik degussa 6 N, quality assurance.

1. Supply PMMA Taiwan chi mei high liquidity CM-211; Heat resistant level CM-205; General level CM-207;

2. Supply PMMA zhenjiang chi mei CM-211, 205- CM, CM-207;

3. Supply PMMA Korean LG IF850 general level, IG840, EH910, EF940;

4. Ruby colour, supply PMMA British general level CP-51 A, CP-61 A, CP-81 A;

5. Supply PMMA arkema thermal resistance V150, V020; High temperature resistant V040 excellent wear resistance, V825;

6. Supply PMMA nantong li Yang impact resistance general level MF001; Heat resistance of climate resistance VH001; Setting the level TF8, VH5; IRD70, MD001, VH150

7. Japan's sumitomo supply PMMA resistance to impact HT55X; Heat resistance MH; LG2, LG, TH50Y;

8. Supply PMMA Japan as a climatic 560 F into resistance; Injection class 80 N;

9. Supply PMMA mitsubishi li Yang impact resistance VRL40; Setting the level TF8, VH5; Heat resistance of climate resistance VH001; High IRH70 blunt, IRD70, MD001,

10. Supply PMMA Germany degussa 5 N, 7 N, 8 N, 7 H, 7 M, 8 H, 8 NDF23.

11. Supply PMMA ebon T-80 Taiwan

Properties: FeiJingTi polymer, 92% light transmittance, the thermal denaturation temperature between 74 ° C ~ 102 ° C in between.

Advantages: 1, highlights learn transparency; 2, good cold; 3, better rigidity; 4, easy dyeing.

USES: chimney, window, sign, optical lens, hard contact lenses, car parts.

Read more: Buy A VH001 PMMA

The Use of F30-03 POM

F30-03 POM is mianly for engineering products for general use.POM (English: polyformaldehyde) crystalline thermoplastic polymer. Known as the “super steel” or “race of steel”, also known as polyoxyethylene methyl. Structure, the English abbreviation for the POM. Usually derived from the polymerization of formaldehyde polymer, the degree of polymerization is not high, and the vulnerable thermal depolymerization.
POM is a no side-chain, high-density, high-crystalline linear polymer with excellent performance. POM is a smooth, shiny, hard and dense material, yellow or white, in the -40-100 ° C temperature range, long-term use. Its wear resistance and self-lubricating plastic is superior than most, and good oil resistance, peroxides performance. Very acid, alkali and intolerance intolerant solar ultraviolet radiation. POM tensile strength 70MPa, water absorption, dimensional stability, glossy, the good performance than nylon, POM is a highly crystalline resin, the thermoplastic resin is the toughest. With thermal strength, flexural strength, fatigue resistance of high intensity, abrasion resistance and excellent electrical properties.
General synthesis of POM aqueous solution of formaldehyde in the presence of acid condensation polymerization. Received more than 100 degree of polymerization of a-POM, and then broken down into formaldehyde gas heated by the refined and dehydration, often using some of the pre-polymerization of purified monomer, and then pass into the initiator containing a small amount of solvent in the dry polymerization. Because of the presence of water, so that a significant reduction in molecular weight. Initiator can be a Lewis acid or alkali. But most of the anion with tertiary amine addition polymerization, the reaction is as follows: POM acetal end groups of a half (-CH2OH), when the temperature is higher than 100 ℃, end-easy to break, the general subject that the stability of end-processing of. Stabilization can be heat treated to 230 ℃. Paraformaldehyde in 170 ~ 200 ℃ temperature processing, such as injection, extrusion, blow molding, etc. Mainly used for engineering plastics for the automotive, mechanical parts and so on.
Polyoxymethylene (pom) is an excellent engineering plastics, in foreign countries have “wins Steel”, “2 POM products
Super steel, “said. Pom with similar metal hardness, strength and rigidity, in a wide range of temperature and humidity have a good self-lubricating, good fatigue resistance, and resilient, it also have better chemical resistance. pom below the cost of many other engineering plastics, is replacing some of the traditionally occupied by the metal markets, such as alternative zinc, brass, aluminum and steel production in many parts, since its inception, pom has been widely used in electrical and electronic, mechanical, instrumentation, daily light industry, automobile, building materials, agriculture and other areas in many new areas of applications such as medical technology, sports equipment, etc., pom also showed good growth .



Read more:F30-03 POM  for sale

The Introduction of LG2 PMMA

 

PMMA (polymethyl methacrylate) English name: PolymethylMethacrylate. PMMA resin is non-toxic and environmentally friendly material that can be used to produce tableware, sanitary ware, etc., have good chemical stability, and weatherability. PMMA resin is not easy to produce sharp in broken fragments, the United States, Japan and other countries and regions have been made ​​mandatory in the law, schools and kindergartens architectural glass must be used PMMA resin. At present, all over the country to speed up the pace of urban construction, street signs, advertising light boxes and telephone booths, large numbers, in which a considerable portion of the material used is PMMA resin. Beijing Olympic project building outdoor color green also makes extensive use of PMMA resin.Gather methyl methacrylate (mma), with acrylic acid and its ester polymerization of acrylic polymer referred to get such tree ester, corresponding plastic collectively polyethylene acid plastic, among them with poly (methyl propylene methyl ester most widely used. Gather methyl methacrylate (mma) abbreviation code PMMA, plexiglass, is by far the most transparent material texture synthesis of excellent, price and more suitable varieties. Application: PMMA soluble in organic solvent, such as phenol, benjia ethers, through the spin coating can form a good film, has the good dielectric properties, as there is an airport effect tube (OFET) is also called the organic thin-film transistors (OTFT) medium layer.
Typical Applications
Automotive industry (equipment, lights, instrument panel, etc.), pharmaceutical industry (blood storage containers, etc.), industrial applications (DVD, light scattering device), key electronic products (especially transparent). Consumer goods (beverage cups, stationery, etc.). PMMA dissolved in organic solvents, such as phenol, anisole, etc., can be formed by spin-coating a good film with good dielectric properties, can be used as organic field effect transistor (OFET), also known as organic thin film transistor (OTFT) dielectric layer .
Chemical and Physical Properties
PMMA has good optical properties and resistance to climate change features. White light penetrating up to 92%. PMMA products with very low birefringence, particularly suitable for making VCDs. PMMA has a room temperature creep. As the load increased, the time growth can lead to stress cracking phenomenon. PMMA has good impact properties. As the PMMA surface hardness is not high, easy to clean hair, low-impact resistance, molding defects and poor flow properties, PMMA modified one after another. Such as methyl methacrylate and styrene butadiene copolymer, PMMA and PC blends and so on. Super transparent PMMA material mainly used for mobile protection screen, the product is divided into a hardening coating, without curing the coating two. It features excellent light transmission rate, impurities, electrostatic protective film, the surface hardness after hardening up thick 5-6H above present especially recommended for hardening of the PMMA material, the domestic as health board.



Read more: Buy A LG2 PMMA

The Application of AG15A1

AG15A1 meet UL, FDA, SGS and environmental requirements of the inspection standard high gloss, medium impact resistance toys, clock case, sound case, suitcase, appliance housings.ABS 15A1 ABS plastic chemical name: Acrylonitrile - butadiene - styrene copolymer English Name: Acrylonitrile Butadiene Styrene weight: 1.05 grams / cubic centimeter molding shrinkage 0.4-0.7% molding temperature :200-240 ℃ dry conditions: 80 -90 ℃ 2 hours Operating temperature: -50 ~ +70 ℃。
ABS resin is the largest output, the most widely used polymer, which PS, SAN, BS various performance organic unity, both tough, hard, just fine with balanced mechanical properties. ABS is acrylonitrile, butadiene and styrene copolymer, A representative of acrylonitrile, B stands for butadiene, S for styrene. ABS plastic is generally opaque, and the appearance of pale ivory, non-toxic, tasteless, both tough, hard, just the characteristics of slow burning, the flame was yellow, with black smoke, combustion of plastic softening, scorching, issued a special cinnamon smell, but no melt drip phenomenon. ABS engineering plastic with excellent overall performance, with excellent impact strength, dimensional stability, electrical properties, abrasion resistance, chemical resistance, dyeing, molding and machining better. ABS resin, water, inorganic salts, alkalis and acids, alcohols and insoluble in most hydrocarbon solvents, and easily soluble in aldehydes, ketones, esters and some chlorinated hydrocarbons.
Features
1, the overall performance is better, high impact strength, chemical stability, good electrical properties.
2, and 372 glass of good welding, plastic parts made of color, and can be chrome plated, paint treatment.
3, there are high impact, high heat resistance, flame retardant, enhanced level of transparency and so on.
4, more mobile than HIPS almost, than PMMA, PC and other good, good flexibility. Uses: suitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.
Molding characteristics1) amorphous materials, liquid medium, large moisture, must be fully dry, the surface gloss of the plastic parts required to be a long dry and warm 80-90 degrees, 3 hours.
2) should take the high melt temperature, high mold temperature, but too easy to break down the material temperature (decomposition temperature> 270 degrees). For high precision plastic parts, mold temperature should take 50-60 degrees, high gloss. Resistance thermoplastic parts, mold temperature 60-80 degrees should be taken.
3) the solution folder for watermarks, the need to improve material flow, material to high temperature, high mold temperature, or change into water and other methods.
4) such as forming heat-or flame-retardant grade material, production 3-7 days after the remnants of the plastic mold surface decomposition, leading to the mold surface shiny, take time to clean up the mold, the mold surface, while the need to increase the exhaust position.
ABS plastic shortcomings: a low heat distortion temperature, flammable, weather is poor. Acrylonitrile - butadiene - styrene polymer grade ABS parts described Name Type Origin refers g/10min melting characteristics and uses 9715A Jilin 16 for cars, home appliances, electronic products shell accessories, toys, daily necessities and other industries and products. 0215A Jilin 20 for cars, home appliances, electronic products, shell accessories, toys, daily necessities and other industries and products. 750 4.5 Daqing Petrochemical are easy mobility, OA equipment, groceries, etc. 301 Portland 1.3-2.3 for a variety of common machine shell parts, household appliances, lamps, sundries. 510 Liaoning Huajin 2.5 for the automotive, home appliances, electronic products shell accessories, toys, daily necessities and other industries and products. 757K Zhenjiang Chimei 4.2 front of the TV shell, shell copier, telephone machine shell, cosmetic box 707K Zhenjiang Chimei 1.9 phone shell, lamp, toys, office supplies, household appliances button. 757 Taiwan Chi Mei 1.8 front of the TV shell, shell copier, telephone case, cosmetic case 747 of the original white 0.8 Taiwan Chi Mei helmets, motorcycle baffle, heel, snow sports goods and other magnetic white 747 Taiwan Chi Mei 1.2 high strength, injection molding. 777D Chimei of Taiwan 6 ultra heat-resistant. 777B Chimei of Taiwan 6.5 heat resistance and good transparency 758 Taiwan Chi Mei Chi Mei Taiwan 765B 4.2 flame resistance, light resistance, heat resistance. South Korea's Kumho 750 4.5 home appliances, auto parts. GP-22 BASF 13-23 home appliances, auto parts. 121H South Korea's LG 20 vacuum cleaners, blenders AG15A1 Ningbo Formosa Chemicals heels, toys, clocks and speaker enclosure, suitcases, etc.



Read more ：ABS 15A1 for sale

The Introduction of HIPS PH-88

HIPS can be replaced in some areas, ABS, the main application areas are packaging, disposable supplies, instrumentation, computer shell, toys, entertainment products and construction industries.Blunt polystyrene and says high grafted type high impact strength polystyrene, hereinafter referred to as is by the ontology-suspension polymerization and bulk polymerization method, the two parties. White is not deeply pearl shape or particles. The relative density of 1.04-1.06. Hot deformation temperature of 70-84 ℃. Good toughness and impact resistance. Oil resistance, water resistance. Water imbibition (24 h) 0.10%-0.14%, electrical insulation and volume resistivity > 1016 Ω m. Soluble in benzene, toluene, acetic acid ethyl ester monomer (VCM) etc, and two organic solvents. Tensile strength (MPa) 15 to 30 elongation (%) 35 to 60 bending strength (MPa) 29.4 ~ 50 impact strength (N/M) 0.09 ~ 0.16 vicat softening point ((℃) 84 ~ 100 melt index (g/l0min) 2 ~ 9 production method : graft copolymerization method with manufacturing, will soon elastomer to tiny particles scattered in polystyrene, then its polymerization or suspension polymerization of. USES: mainly used in home appliance parts shell, automobile and medical apparatus parts, drainage pipe, toys, etc.
Application

1.  types of housing: HIPS widely used in television sets, tape recorders, vacuum cleaners, telephones, air conditioners, washing machines, copiers, lighting equipment, instrumentation, automotive, office supplies, housing, following after the second-generation ABS shell material. Instrumentation and consumer electronics products is growing HIPS markets, including small instrument, refrigerator wall and internal parts, TV housing, air conditioning parts, business machines and audio and video recording tape cartridge. Special level of HIPS has been replaced in many areas, the high price of plastic, a high impact strength, high temperature of HIPS has even used as automotive interior parts.
2. low foaming material: HIPS low foaming product looks like wood, with wood can be sawed, planed, nailed the performance, can be used for packaging, furniture, construction materials.
3. disposable supplies: HIPS is the largest single-minded use of materials as packaging and disposable supplies, food packaging materials and food cutlery, specific use, such as vending machines and packing a cup, a variety of covers, plates, bowls, etc.; disposable supplies areas such as platters class, caps, safety razors, pens, etc.
4. other products: HIPS can also be used to produce plate, sheet, HIPS can also be made ​​of pipe, medical equipment, and textile equipment.

Read more: Buy A HIPS PH-88

The Introduction of LDPE FB3000

LDPE FB3000 is mainly used for transparent bag, film, car packaging, heavy bags, shrinkage filmDegree of low-density polyethylene polyethylene (LDPE) is a plastic material, it is suitable for a variety of molding thermoplastic molding process, forming good. LDPE mainly used for thin-film products, but also for the injection molding products, medical devices, pharmaceutical and food packaging materials, blow molding products.Linear low density polyethylene (LLDPE), ethylene and a small amount of high-level α-olefins (such as butene, hexene, octene-1, four methyl pentene-1, etc.) in the catalyst, the high or low pressure polymerization of a copolymer, the density is 0.915 ~ 0.940 g / cc between. However, according to the ASTM D-1248-84 provisions, 0.926 ~ 0.940 g / cc density range is a medium density polyethylene (MDPE). A new generation of LLDPE density expanded to its plastic body (0.890 ~ ​​0.915 g / cc) and elastomers (<0.890 g / cc). But the U.S. Plastics Industry Association (SPI) and the U.S. Plastics Industry Council (APC) will only extend the scope of LLDPE plastic body, not including elastomers. The 1980s, Union Carbide and Dow Chemical Company to its early sales of plastic and elastomer called very low density polyethylene (VLDPE) and ultra low density polyethylene (ULDPE) resin. General molecular structure of LLDPE is characterized by its linear main chain, only a few or no long-chain branching, but contains some of the short branched-chain. No long-chain branching to higher crystallinity of the polymer. Typically, LLDPE resin density and melt index to characterize. Density of the polymer chain, the concentration of comonomer decision. Comonomer in the polymer concentration determines the amount of short branched-chain. Short chain length depends on the type of comonomer. The higher the concentration of comonomer, the lower the density of the resin. In addition, the average molecular weight of the resin melt index is reflected mainly by the reaction temperature (solution method) and adding chain transfer agent (gas phase) to decide. Independent of molecular weight and molecular weight distribution, which mainly affected by the catalyst type. LLDPE in the 1970s by the Union Carbide Corporation of industrialization, it represents a polyethylene catalyst and process technology a major change, to make polyethylene significantly expanded range of products. LLDPE with a complex catalyst instead of free radical initiator, and a lower cost of low-pressure gas to replace higher-cost high-pressure polymerization reactor, in a relatively short period of time, then its superior performance and lower cost, in many field has been replaced by LDPE. Currently LLDPE into almost all of the traditional polyethylene market, including film, molding, pipe and wire and cable. LLDPE products non-toxic, tasteless, odorless, milky white particles. Compared with LDPE high strength, toughness, rigidity, heat, cold, etc., also has good resistance to environmental stress cracking resistance, tear strength and other properties, and acid, alkali, organic solvent. In 2005, China's LLDPE production is 188 million tons, accounting for 35.5% of total PE; consumption of 3.55 million tons, accounting for PE 33.8% of total consumption. The next 2 to 3 years, LLDPE consumption will remain around 8% rate of continued growth. According to the current market price of 12,000 yuan / ton, the market size of China's LLDPE has more than 400 billion yuan.


Read more: Buy A LDPE FB3000

What is F30-03 POM

F30-03 POM is mianly for engineering products for general use.POM (English: polyformaldehyde) crystalline thermoplastic polymer. Known as the “super steel” or “race of steel”, also known as polyoxyethylene methyl. Structure, the English abbreviation for the POM. Usually derived from the polymerization of formaldehyde polymer, the degree of polymerization is not high, and the vulnerable thermal depolymerization.
POM is a no side-chain, high-density, high-crystalline linear polymer with excellent performance. POM is a smooth, shiny, hard and dense material, yellow or white, in the -40-100 ° C temperature range, long-term use. Its wear resistance and self-lubricating plastic is superior than most, and good oil resistance, peroxides performance. Very acid, alkali and intolerance intolerant solar ultraviolet radiation. POM tensile strength 70MPa, water absorption, dimensional stability, glossy, the good performance than nylon, POM is a highly crystalline resin, the thermoplastic resin is the toughest. With thermal strength, flexural strength, fatigue resistance of high intensity, abrasion resistance and excellent electrical properties.
General synthesis of POM aqueous solution of formaldehyde in the presence of acid condensation polymerization. Received more than 100 degree of polymerization of a-POM, and then broken down into formaldehyde gas heated by the refined and dehydration, often using some of the pre-polymerization of purified monomer, and then pass into the initiator containing a small amount of solvent in the dry polymerization. Because of the presence of water, so that a significant reduction in molecular weight. Initiator can be a Lewis acid or alkali. But most of the anion with tertiary amine addition polymerization, the reaction is as follows: POM acetal end groups of a half (-CH2OH), when the temperature is higher than 100 ℃, end-easy to break, the general subject that the stability of end-processing of. Stabilization can be heat treated to 230 ℃. Paraformaldehyde in 170 ~ 200 ℃ temperature processing, such as injection, extrusion, blow molding, etc. Mainly used for engineering plastics for the automotive, mechanical parts and so on.
Polyoxymethylene (pom) is an excellent engineering plastics, in foreign countries have “wins Steel”, “2 POM products
Super steel, “said. Pom with similar metal hardness, strength and rigidity, in a wide range of temperature and humidity have a good self-lubricating, good fatigue resistance, and resilient, it also have better chemical resistance. pom below the cost of many other engineering plastics, is replacing some of the traditionally occupied by the metal markets, such as alternative zinc, brass, aluminum and steel production in many parts, since its inception, pom has been widely used in electrical and electronic, mechanical, instrumentation, daily light industry, automobile, building materials, agriculture and other areas in many new areas of applications such as medical technology, sports equipment, etc., pom also showed good growth .



Read more:F30-03 POM  for sale

The Introduction of C1200HF Resin

 C1200HF Resin  main features: good anti-impact, high heat resistance, heat distortion temperature of 130 ℃, good mobility, scalability. CYCOLOY blend resin is ideal for automotive, telecom and business equipment housings. It also applies to electrical and electronic products.PC / ABS, excellent mobility, impact resistance, temperature resistance. Low-temperature ductility. Suitable for automotive, appliance and electrical components.
Our company is a private enterprise, mainly engaged in the rubber industry, after years of operation, with the company as a benchmark by the Pearl River Delta region, and actively explore the market, a business covering the whole country, the majority of customers and partners under the continued support and encouragement, and China petrochemical, Taiwan’s Chi Mei, Formosa Plastics, the U.S. GE, DuPont, Eastman, and other large manufacturers of plastic raw materials to maintain good relations of cooperation.
The company insists the principle of small profits at higher prices, like in the sea with customers and friends a better tomorrow product advantages, successfully created a record Jin brand. I hit Kam plastic materials Co., Ltd., Dongguan, in line with ring bully, Yue-off, Ritual, Ren philosophy, mainly for the domestic market and other areas of the market, creating the formation of Dongguan Jin Co., Ltd. is a plastic materials plastic operation of general , engineering plastics and special engineering plastics for the sale of objects of professional traders in plastic raw materials, the company since its inception, actively promote the “integrity as life, word of mouth is extremely heavy” business philosophy, adhere to the “ring bully, Yue-off, Ritual, Ren “the training shop, do business with conscience, and resolutely put an end to prejudice the interests of customers to do business behavior, peers and customers in establishing a good reputation of the company characteristics. Company Registered in 2007, registered capital of 100 million.


Read more: Buy A C1200HF Resin

The Introduction of IF850 PMMA

Polymethyl methacrylate (PMMA) with a very superior optical performance, the board tilting commonly known as Plexiglas, is a highly transparent thermoplastic. Its products include plates, tubes, rods, molding and other varieties. Widely used in aviation, radio, instruments, meters, medical equipment, decorations, instructions and so on.
Together the main properties of methyl methacrylate (mma) :Gather methylacrylic acid methyl ester (PMMA) a colorless transparent glass ones and specific gravity of 1.19, the surface hardness is low, easy to be good thing scratch. Hard to catch fire, but can slow combustion, the fire was still can continue to burning and burning easily break, molten distill, flame bright, bottom blue, top white, issued a strong smell the flowers and rotting vegetables bad smell.
1. Transparency: PMMA is amorphous polymer, its internal molecular arrangement from interference in its light through the speed of each part, and can make the light with the same speed (namely uniform refractive index), don't make the light scattered all around mutual interference. So PMMA excellent optical performance, high transmission rate (90 ~ 92%, and wavelength). Very smooth surface of the piece or bar, in bending to the limits can also will be scored from one end of the light in the internal reflection all forward, finally from the other end injection, like water pipe in through the same (certain refers to the degree of curvature of the position and bending the original position to Angle, no more than 42 °; bending with arc arc radius, must be more than bar diameter or plate thickness of the 3 times). But when the surface of a part of the grinding hair, light can from here to escape and shows light. Can use this property to make edge lighting apparatus, surgical medical apparatus, etc.
2. Mechanical properties: PMMA mechanical strength than common glass high 10 times above, but compared with other plastic strength can calculate medium. Its defect is qualitative light crisp, and easy to crack (or appear silver lines), surface hardness is low, easy scratches and lose luster; A poor wear-resistance, the static friction coefficient between each other is 0.8, the frictional coefficient of steel is 0.45 ~ 0.50, so easy to scratch grinding wool.
3. Performance: PMMA is good performance, especially in low frequency work conditions. Yet its some performance is unique: dielectric loss Angle tangent on frequency increases and reduced. Temperature and frequency of dielectric constant is influential, and climate and humidity on the influence of the electric performance is not big. But electric performance than PE, PS pattern.
4. Thermal performance: PMMA heat resistance is not good enough, using temperature of only 80 ℃. Through its single and double ester base acrylic glycol esters or methyl methacrylate acrylic ester, crosslinking copolymerization, in order to improve the heat resistance. The heat PMMA than most thermoplastic are low, which is helpful for its fast plasticizing heated. And it still has certain cold resistance, in the low 50 ~ 60 ℃- , impact strength changed little.
5. Chemical properties; PMMA has certain chemical corrosion-resistant ability, but increases with temperature decrease. Gas chemically resistant ability is strong, long-term and ozone, sulfur dioxide, contact, did not appear corrosion situation; Chlorine can corrode its surface. Can dissolve in ethyl acetate or butyl acetate, glacial acetic acid, chloroform and benzene, etc; Can absorb all kinds of alcohol organic compound, make volume expansion, the surface coarse wool, but insoluble in aliphatic compounds.
6. Resistance to climate sex: excellent weathering resistance, in the tropical climate exposure transparency and colour and lustre is very little change for many years.


Read more: Buy A IF850 PMMA

The Introduction of F30-03 POM

F30-03 POM engineering plastic Co., LTD of acetal (POM) copolymer a simple flow injection molding thin level components. It improved thermal stability.
POM species of polyethylene oxide (referred to as POM) POM plastic is the second after the development of nylon resin is another excellent variety, with excellent overall performance. POM has a good solvent, oil type, resistant to weak acid, weak base properties. POM has a high hardness and rigidity, high resistance to creep and stress relaxation ability, excellent wear resistance, self lubrication, and fatigue.
POM is a no side-chain, high-density, high-crystalline linear polymer with excellent performance. POM tensile strength up to 70MPa, at 104 ℃ under long-term use, brittle temperature of -40 ℃, low water absorption. However, poor thermal stability of POM, weather is poor, long-term exposure to aging in the atmosphere.
The mechanical properties of POM is quite good, it has a high strength elastic modulus, low coefficient of friction, good wear resistance. POM is also highly resistant to creep and stress relaxation ability.
POM dimensional stability, water absorption is very small, so the water absorption of its mechanical properties can not be considered. POM has good dielectric properties over a wide frequency and temperature range, its dielectric constant and dielectric loss tangent value changed very little.
POM poor heat resistance, molding temperature in the pan easily degradable release formaldehyde, usually in the granulation are added stabilizer. If not force, POM can be at 140 ℃ under the short-term use, its long-term use temperature of 85 ℃.
POM poor weather, the atmospheric aging, the general performance has declined. But its chemical stability is excellent, especially for organic solvents, its size and mechanical properties change very little lower. But strong acids and strong oxidants such as nitric acid, sulfuric acid corrosion resistance is poor.


Read more: Buy A F30-03 POM 

The Introduction of PP 1100NK

PP 1100NK, PP, also known as polypropylene, commonly known pleated plastic; eccentric plastic Thai Petrochemical PP 1100NK provided is a non-side-chain, highly crystalline linear polymer plastic, harder than PE, and the melting point is high, it with excellent performance, the proportion of small, rigid, flex-resistant, high strength, resistance to chemical corrosion, almost non-absorbent, good fluidity, easy to process; and have excellent fiber-forming nature, known as the " ideal fiber, "which is very good tensile properties, the applications is very broad; the automotive industry, intermediate load bearing components of the ideal material for the most economical. PP is generally irregular surface waxy luster white round pellets, density 0.9-0.91g/cm3 is the lightest kind of plastic, have a more obvious melting point, according to the different crystallinity and molecular weight, melting point at 170 ℃ up and down, above the decomposition temperature of 290 ℃, so the PP has a very wide range of molding temperature, molding shrinkage of 1.0-2.5%; and uniformity of shrinkage in the direction other than the PE-HD material is much better; PP does not exist environmental stress cracking problems, usually by adding fiberglass, metal additives or other methods of thermoplastic rubber modified PP, it's better performance; with 30% glass additive can make shrinkage down to 0.7%, respectively, polymer-and copolymer type of PP material with excellent moisture absorption, resistance to acid corrosion, anti-solubility; Vicat softening temperature of PP 150 ℃, as high crystallinity, the material stiffness and resistance of the surface properties of very good marks; for hands and surfaces often easy access to high product demands; PP at room temperature, in fact, completely from water erosion, but in addition to outdoor use outside Canada need to add some antioxidant light stabilizer; PP with temperature up to 100 ℃, has good electrical properties and high-frequency insulation, and the humidity is changed from less than lies, will become brittle at low temperatures, do not wear, easy to aging, suitable for production of general mechanical parts, components and corrosion-resistant insulating layer, in addition, with the PP production will hinge products with outstanding fatigue resistance, in the pharmaceutical, food, chemical industry and daily life of PP has a wide range of uses; PP Application description: Consumer goods: pots, barrels, film, small furniture, bags, caps, lawn garden equipment, such as lawn mowers and sprinklers, etc.; automobile manufacturing industry: the main use of metal additives PP, used production of fenders, bumpers, fan blades, ventilation pipes, etc.; equipment manufacturing: such as dishwasher gaskets, refrigerator door gasket, washer frame and cover, dryer vent pipes, etc.; engineering plastics can be used for: electrical insulation material, anti-corrosion pipe, sheet, TV shell, tank, etc.; Processing of PP are many ways: extrusion, injection molding, pressure molding, blow molding and thermoforming, etc.; PP injection molding screw injection molding machine to the main injection conditions: feed temperature of 200 ~ 250 ℃, mold temperature 40 ~ 60 ℃, injection pressure of 40 ~ 70MPa; molding conditions selected should also consider the shape of the mold shrinkage structure and cooling, the product stripping and other issues; PP 1100NK if not stored properly dried prior to processing, but in the process of cooling must beware of too fast, pouring and cooling system, cooling system should be slow and pay attention to controlling the temperature, the material temperature was low directivity, low temperature high pressure particularly evident in the mold temperature is below 50 ℃, the plastic is not smooth, easy to produce bad welding, there are traces, 90 ℃ or more easy to produce warpage, plastic wall thickness to be uniform to avoid the lack of plastic, sharp corners to prevent stress not naturally eliminated; if the products had surface defects, then you should use a high temperature low injection. National company and agent of plastic raw material, polypropylene PP origin and variety of goods. Is launching a number of origin, various models for reference: Japan Culp: FR150, GF-1510A, Japan Purui Man: J105G, J747W, X810L, J715M, V7104, Thailand Basel: HP480S, RP100, EP300L, RP348N, Thailand petrochemical: 1100NK, 1100PK, 1100RC, 1126NK, 3342R, 2500H, 3240H, 3342M, 348S, SCG Chemicals, Thailand: P840J. Polypropylene (PP) Characteristics: 1. Physical properties: non-toxic, odorless, tasteless white high crystallinity of the polymer. All plastic is one of the lightest species. (2) mechanical properties, 3 thermal performance: PP has good heat resistance. 4 chemical stability, 5 electrical properties, 6. Weatherability. Uses: film products, injection products, squeezing products, other and so on. Processing parameters can contact customer service, more product information, news information, please see our website!




Read more: PP 1100NK for sale

The Introduction of PP HJ730

 PP HJ730  is a high-dimensional nature of the rules of the homopolymer PP. How is it compared to crystalline PP is high, is the product of the steel and heat resistance are essential to improve a resin. HJ730 for prolonged exposure to high temperatures, high electrical and electronic parts and steel parts.
Features:
1 Physical properties: Polypropylene is non-toxic, odorless, tasteless white high crystallinity of the polymer, the density is only 0.90-0.91g / m, is the lightest of all varieties of plastic.
(2) mechanical properties: resistance to bending fatigue.
3 thermal performance: PP has good heat resistance, melting point at 164-170 ℃, 100 ℃ for products in the temperature sterilization, without external forces, 150 ℃ is not deformed. Embrittlement temperature of -35 ℃, below -35 ℃ embrittlement occurs, cold resistance than polyethylene;
4 electrical properties: high frequency polypropylene insulation performance, because it is almost non-absorbent, so the insulation from humidity and it has a higher dielectric constant and temperature increases, heat can be used to make electrical insulation products, it is also very high breakdown voltage, suitable for electrical accessories, anti-voltage, arc resistance is good, but the static and high copper contacts is easy with aging;
5 weather resistance: very sensitive to UV polypropylene, adding zinc oxide, thio Dilauroyl propionate ester, carbon black or similar white fillers can improve its anti-aging properties;
Purposes: plate, pipe, jelly cups, dishes; for automotive, electrical, mechanical, instrument, radio, textile, national defense and other engineering accessories, daily necessities, turnover box, medical equipment, construction materials.
National company and agent of plastic raw material, polypropylene PP origin and variety of goods. Is launching a number of origin, various models for reference: South Korea’s Hyundai: H1500, H4540, H5300, DJ-570S, Hyosung: HJ730, HJ400, HB240P, HJ801R, J440, J440X, J640, J740, J742, J801, J801R , J945, HJ800R, J430, J440W, J700, R300X, R301, R601, FS5611L, J340. Polypropylene (PP) Characteristics: 1. Physical properties: non-toxic, odorless, tasteless white high crystallinity of the polymer. All plastic is one of the lightest species. (2) mechanical properties, 3 thermal performance: PP has good heat resistance. 4 chemical stability, 5 electrical properties, 6. Weatherability. Uses: film products, injection products, squeezing products, other, etc.


Read more:PP HJ730 for sale

What is ABS 717C

ABS 717C,is strengthened. Therefore, impact strength, tensile strength and surface hardness of ABS, better than the HIPS.its heat resistance and solvent resistance than HIPS better. In addition, it also has the glass. Because Cyantic polAcrylonitrile, themutual PS chain action.ABS resin and become a good engineering plastic. ABS resin is the most diversified copolymer, acrylonitrile, butadiene styrene and market. Our unique technology has its special ABS resin of matching and assembly strength, stable, and processing power. Quality, color and appearance of dyeing , win customer trust.
Our company supply ABS 717C injection level. High-pitched red, high impact strength. Usage: kitchen appliances, audio products, toilet seat, washing machine, vacuum cleaner housings, tool handles and other accessories. Important parameters: melt flow rate: 1.4 g/10min density: 1.04 g/cm3 notched impact strength: 28 Tensile strength: 44 MPa Elongation at break: 25%.Our company is widely accepted and used to in machinery, electronic parts, communication equipment, computer, electric appliance, auto parts, wei yu, boot, faucet and other household items.We cover market all kinds of specifications, and has already passed UL and C-UL approval. A general level, high flow level, extrusion level, flame retardant grade, high heat resistance level and transparent level, specifications, can be readily available. In addition, it is also responsible for coordination blossom a new class, to develop new market and new purpose.


Read more: ABS 717C for sale

What is ABS 777D

ABS 777D is an acronym, is a high strength, good toughness, easy processing of forming thermoplastic polymer material is acrylonitrile (ACRYLONITRILE), 1,3 – butadiene (BUTADIENE), styrene (STYRENE) three kinds of monomers of the graft copolymer, suitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.ABS 777D is suitable for production of general machinery parts, reducing wear resistant parts, transmission parts and telecommunications components.Characteristics(1) amorphous materials, liquid medium, large moisture, must be fully dry, the surface gloss of the plastic parts required to be a long dry and warm 80-90 degrees, 3 hours.
(2) should take the high melt temperature, high mold temperature, but too easy to break down the material temperature (decomposition temperature> 270 degrees). For high precision plastic parts, mold temperature should take 50-60 degrees, high gloss. Resistance thermoplastic parts, mold temperature 60-80 degrees should be taken.
(3) Watermark folder for solutions, the need to improve material flow, material to high temperature, high mold temperature, or change into water and other methods.
(4) such as forming heat-or flame-retardant grade material, production 3-7 days after the remnants of the plastic mold surface decomposition, leading to the mold surface shiny, take time to clean up the mold, the mold surface, while the need to increase the exhaust position.

Read more：ABS 777D for sale